Bernese GNSS Software Version 5.2 Tutorial

6.3 Check the Daily RepeatabilityWe can conclude that no problems concerning the stations used for the datum definitionwere detected.If there were problems, the ADDNEQ2 run needs to be repeated with the problematicstation either removed from the file ${P}/INTRO/STA/IGB08.FIX or with manual selectionof the stations used for the datum definition in panel “ADDNEQ2 5.1: Datum Definition forStation Coordinates”.6.3 Check the Daily RepeatabilityIf the minimum constraint solutions of the four sessions are available, the repeatabilityof the coordinate solutions may be checked using the program COMPAR ("Menu>Service>Coordinate tools>Coordinate comparison").Bernese GNSS Software, Version 5.2 Page 87