Bernese GNSS Software Version 5.2 Tutorial

7.3 Zero Difference Processing for Clock Estimation24 28 55403.000000 -9.425636 0.000243 -9.425393 0.007 2224 31 55403.000000 -21.952063 0.000400 -21.951663 0.084 2 *24 32 55403.000000 -46.318216 0.000391 -46.317825 0.003 2624 104 55403.000000 0.000000 -79.261441 -79.261441 7.817 1 *24 105 55403.000000 0.000000 -153.329765 -153.329765 0.004 1824 107 55403.000000 0.000000 -292.763000 -292.763000 0.011 1824 113 55403.000000 0.000000 -276.613680 -276.613680 0.023 924 114 55403.000000 0.000000 -168.480117 -168.480117 0.010 1524 115 55403.000000 0.000000 23.463570 23.463570 0.028 624 120 55403.000000 0.000000 -73.657589 -73.657589 0.004 1824 121 55403.000000 0.000000 -200.316163 -200.316163 0.003 1824 122 55403.000000 0.000000 -10.570535 -10.570535 0.006 1824 3 55403.003472 586.452934 -0.001007 586.451927 0.015 1324 6 55403.003472 559.021364 0.001906 559.023270 5.001 1 *...The “∗”–character indicates satellites where the satellite clock correction has been computedfrom a limited number of stations.Because this section can become very long, it can also be skipped in the GPSEST programoutput by checking the box “Printing: Suppression of output concerning epoch parameters”in panel “GPSEST 3.2.1.1: Extended Program Output Options” (enabled only if thecheckbox “Enable extended program output” in panel “GPSEST 3.2: General Options 2” ischecked).Differences of clocks and Allan deviations for differences of clocks can be extracted from theGPSEST program output by the program GPSXTR ("Menu>Processing>Program output extraction>Parameter estimation/stacking"). The pair of clocks (receiver or satellites) are defined by abaseline file (extension BSL).The baseline file might, e.g., be generated via the "Menu>Campaign>Edit station files>Baselinedefinition file":Bernese GNSS Software, Version 5.2 Page 129