Bernese GNSS Software Version 5.2 Tutorial

6 Terminal Session: ThursdayIn the following three panels, all parameter types supported by ADDNEQ2 are listed. Youmay specify whether a parameter shall be pre-eliminated or not. An empty entry meansthat the parameter is not expected in the input NEQ files.Please note that an automated preselection is not possible for technical reasons. If aparameter with an empty input field is detected in the input NEQ files, the program willstop with an error. In the opposite case, a warning message is issued.For the validation of the datum stations we choose the “Minimum constraint solution”. Becauseit is a regional network, we only apply the no–translation condition. The other conditionsare sufficiently defined by the satellite orbits.Page 82AIUB