Aaron Bovie 950 User Manual - Med-E-Quip Locators

More documents

Recommendations

Info

RESPONSIBILITY OF THE MANUFACTURERAaron Medical is responsible for the safety, reliability, and performance of the generator only under the followingcircumstances:• The user has followed the installation and setup procedures in this user’s guide.•Persons authorized by Aaron Medical performed assembly operation, readjustments, modifications, or repairs.• The electrical installation of the relevant room complies with local codes and regulatory requirements, such asIEC and BSI.•Equipment use is in accordance with the Aaron Medical instructions for use.For warranty information, refer to Appendix C – Warranty.RETURNING THE GENERATOR FOR SERVICEBefore you return the generator, call your Aaron Medical representative for assistance. If instructed to send thegenerator to Aaron Medical, first obtain a Returned Goods Authorization Number. Then clean the Generatorand ship it to Aaron Medical for service.Step 1 – Obtain a Returned Goods Authorization NumberCall the Aaron Medical Customer Service Center to obtain a Returned Goods Authorization Number.Have the following information ready when you call:• Hospital / clinic name / customer number•Telephone number• Department / address, city, state, and zip code•Model number• Serial number• Description of the problem•Type of repair to be doneStep 2 – Clean the GeneratorWARNING:Electric Shock Hazard - Always turn off and unplug the generator before cleaning.NOTICE:Do not clean the generator with abrasive cleaning or disinfectant compounds, solvents, or othermaterials that could scratch the panels or damage the generator.A. Turn off the generator, and unplug the power cord from the wall outlet.B. Thoroughly wipe all surfaces of the generator and power cord with a mild cleaning solution or disinfectant anda damp cloth. Follow the procedures approved by your institution or use a validated infection control procedure.Do not allow fluids to enter the chassis. You cannot sterilize the generator.7-2 Bovie / Aaron Medical
Step 3 – Ship the GeneratorA. Attach a tag to the generator that includes the Returned Goods Authorization Number and the information(hospital, phone number, etc.) listed in Step 1 – Obtain a Returned Goods Authorization Number.B. Be sure the generator is completely dry before you pack it for shipment. Package it in its original shippingcontainer, if available.C. Ship the generator, prepaid, to the address given to you by the Aaron Medical Service Center.User’s Guide • Aaron 9507-3
Page 2: iiBovie / Aaron Medical
Page 6: LIST OF FIGURESFigure 2 - 1 Layout
Page 9 and 10: WARNINGS:Hazardous Electrical Outpu
Page 11 and 12: NOTICES:Do not clean the generator
Page 13 and 14: CONTROLS, INDICATORS, AND RECEPTACL
Page 15 and 16: Symbols on the Front PanelThe follo
Page 17 and 18: FULGURATION, BIPOLAR, AND PRESET CO
Page 19 and 20: REAR AND SIDE PANELSFigure 2 - 5 La
Page 22 and 23: INITIAL INSPECTIONWhen you first un
Page 24: INSPECTING THE GENERATOR AND ACCESS
Page 28 and 29: ACTIVATION SAFETYWARNINGSDo not wra
Page 30 and 31: 950BOVIE ® GENERATOR HIGH FREQUENC
Page 32 and 33: Aaron Medical recommends that you c
Page 34 and 35: The Aaron 950 Electrosurgical Gener
Page 38 and 39: 7-4 Bovie / Aaron Medical
Page 40 and 41: PERFORMANCE CHARACTERISTICSInput Po
Page 42 and 43: STANDARDS AND IEC CLASSIFICATIONSCl
Page 44 and 45: OUTPUT POWER CURVESThe curves that
Page 46 and 47: Monopolar Coag CurvesThese measurem
Page 48 and 49: Bipolar CurvesFigure A - 9 Output p
Page 50 and 51: FOOTSWITCHESA1203W Aaron 950 Footsw
Page 52 and 53: LLETZ ELECTRODESAll Aaron LLETZ Loo
Page 54 and 55: MOUNTING OPTIONSThe Aaron 950 comes
Page 56: This warranty is in lieu of all oth

Aaron Bovie 950 User Manual - Med-E-Quip Locators

Create successful ePaper yourself

Delete template?

Save as template?