PA48 Mk2 Operator Manual - McConnel

CABLE CONTROLSCable controlled machines are supplied with a control unit of the type shown below – someversions will have the rotor control lever assembled alongside the armhead control leversas shown below and others may be supplied with the rotor control lever as a ‘standalone’unit with its own individual mounting bracket.The armhead control levers all move in a forwards and backwards direction eachcontrolling a specific arm function.Where applicable, if a machine is fitted with the optional electric lift float feature, operationof the lift float will be via an additional electrical switch which will need to be installed in aconvenient location in the tractor cab.LOCATION & FUNCTION OF CONTROLS1. Arm Lift Control2. Arm Reach Control3. Head Angle Control / Angle Float Selection4. Rotor ControlNOTE: The illustrations on the following pages show the methods of operation for all possiblefunctions – depending on individual specifications some features may not be present on yourparticular machine and will therefore not be applicable.20