PA48 Mk2 Operator Manual - McConnel

XTC PROPORTIONAL SWITCHBOX CONTROLSMachines with XTC Proportional Controls will be supplied with the control unit shownbelow. The units for both electric and cable rotor machines are identical except that oncable versions the rotor control switches (D & E shown below) will not provide a functionas rotor operation will be controlled by a separate cable lever unit (refer to specific cablerotor control page for operation information).NOTE: On machines with 3 arm functions (Lift, Reach & Angle) levers 4 & 5 where fitted willnot operate any functions.LOCATION & FUNCTION OF CONTROLS1. Arm Lift Control2. Arm Reach Control3. Flailhead Angle Control4. N/A5. N/AA. Power On/OffB. N/AC. Head Float - Angle/Lift (Option)D. Rotor On/Off (Electric RCV models)E. Rotor Direction (Electric RCV models)Powering the ControlsActivation of power to the control unit is by operation of switch ‘A’ as shown below:Press the switch down for Power ON (LED light on)Press the switch up for Power OFF (LED light off)PowerONPowerOFF32