Modular FRL Unit Series AC - SMC

Series ACPiping Adapter M5, 1/8, 1/4, 3/8, 1/2, 3/4, 1A piping adapter allowsinstallation/removal of thecomponent without removingthe piping and thus makesmaintenance easier.Piping adapterDPort sizeCentre ofF.R.L. bodyPressure Switch with Piping AdapterABModel Note 1)E100-M5E200-01E200-02E200-03E300-02E300-03E300-04E400-02E400-03E400-04E400-06E500-06E600-06E600-10Port sizeM51/81/43/81/43/81/21/43/81/23/43/43/41A103032323235B1423.530364048Applicable modelAC10, AW10, AF10, AR10, AL10AC20AF20, AR20, AW20AL20, AFM20, AFD20, AWM20, AWD20AC25, AC30AF30, AR30, AW30AL30, AFM30, AFD30, AWM30, AWD30AC40AF40, AR40, AW40AL40, AFM40, AFD40AWM40, AWD40AC40-06, AF40-06, AR40-06, AW40-06AL40-06, AFM40-06, AFD40-06AC50, AC55, AC60, AC50AAC60A, AC50B, AC55BAC60B, AF50, AF60, AR50AR60, AL50, AL60, AW60Note 1) in model numbers indicates a thread type. No indication is necessary for Rc;however, indicate N for NPT, and F for G.Note 2) Separate interfaces are required for modular unit.∗ Factory mounting of piping adaptes on the AC models are available as a special order.D142830364453IS1000E 30 03JIS SymbolNote) For thread type: NPT only. This product is for overseas use only according to the new Measurement Law.(The SI unit type is provided for use in Japan.)SpecificationsFluidAirAmbient and fluid temperature –5 to 60°C (with no freezing)Proof pressure1.0 MPaMaximum operating pressure0.7 MPaSet pressure range (when OFF) 0.1 to 0.4 MPaHysteresis0.08 MPa or lessSwitch CharacteristicsContact point configurationMaximum contact point capacityOperating voltage: AC, DCMaximum operating current25Thread typePort sizeAccessorySymbol-N Note)F Note)+0102030406+Symbol-X250P Note)X250-P Note)X202X252X202-P Note)X252-P Note)X201X251X201-P Note)X251-P Note)X215X253X215-P Note)X253-P Note)Lead wire length0.5 m0.5 m0.5 m0.5 m0.5 m0.5 m0.5 m0.5 m3 m3 m3 m3 m3 m3 m3 m3 mRegulating pressure range0.1 to 0.4 MPa0.1 to 0.4 MPa0.1 to 0.4 MPa0.1 to 0.4 MPa0.1 to 0.6 MPa0.1 to 0.6 MPa0.1 to 0.6 MPa0.1 to 0.6 MPa0.1 to 0.4 MPa0.1 to 0.4 MPa0.1 to 0.4 MPa0.1 to 0.4 MPa0.1 to 0.6 MPa0.1 to 0.6 MPa0.1 to 0.6 MPa0.1 to 0.6 MPa1a2VA(AC), 2W(DC)100V or less12V to 24V AC, DC: 50 mA48V AC, DC: 40 mA100V AC, DC: 20 mADescriptionRcNPTG1/81/43/81/23/4Pressure displayMPaMPaMPa/PSI dual scaleMPa/PSI dual scaleMPaMPaMPa/PSI dual scaleMPa/PSI dual scaleMPaMPaMPa/PSI dual scaleMPa/PSI dual scaleMPaMPaMPa/PSI dual scaleMPa/PSI dual scaleMounting positionRightLeftRightLeftRightLeftRightLeftRightLeftRightLeftRightLeftRightLeftModel Note 1)IS1000E-2001IS1000E-2002IS1000E-2003IS1000E-3002IS1000E-3003IS1000E-3004IS1000E-4002IS1000E-4003IS1000E-4004IS1000E-4006Port size1/81/43/81/43/81/21/43/81/23/4Body size20 30 40A303232B6874.580.5LeftBC5760.562.5D23Note 1) in the model numbers indicates a thread type. No indication is necessary for Rc; however, indicateN for NPT, and F for G.Note 2) Cannot be mounted on the AC40-06 and AW40-06.Note 3) Separate interfaces are required for modular unit.∗ The pressure switch on the AC40-06 and above and the AW40-06 can be mounted by screwing IS1000-01 intothe piping adapter E500-06-X501 or E600-06-X501 to E600-10-X501 (with top-face thread Rc 1/8). Productswith a premounted switch are available as a special order. Please contact SMC regarding their availability.CD283037E161312.5Pressure switch withpiping adapterApprox. 500RightPort sizeCentre ofF.R.L. bodyAEApplicable modelAC20AR20, AW20AWM20, AWD20AC25, AC30AR25, AR30, AW30AWM30, AWD30Note 2)AC40AR40, AW40AWM40, AWD40