MECHANISATION AUTOMATION - Esab

More documents

Recommendations

Info

ESAB high purity consumables forwelding creep resisting steelsESAB has added two low-hydrogenelectrodes to its range of consumablesfor creep resisting steels; OK 76.16 for1.2Cr – 0.5Mo types and OK 76.26for 2.25Cr – 1.0Mo.Impurity elements, such as Sn, As, Pand Sb, are strictly controlled - leadingto a guaranteed Bruscato factor ofX
OrigoMag C150/C170/C200/C250A recent addition to the Origo familyOrigoMag is the ideal weldingmachine for everyone who wantsgood equipment to do less complexwelding jobs of high quality.OrigoMag C150, C170, C200 andC250 are step-regulated powersources for MIG/MAG welding.They are designed for light-dutyapplications. A built-in wire feeder,and the low weight of the units,make them perfect, practical solutionsfor farmers, repair shops and lightproduction users.MIG/MAG welding.OrigoMag can be used with bothsolid wire and self-shielding coredwire. It is designed for welding ofsteel, stainless steel and aluminium.Wire diameters from 0.6 mm up to1.2 mm can be used depending onthe type of machine.Easy to useThe Power Smoothing Deviceimproves welding when CO 2or Ar/CO 2gas mixture is used. The unitsare equipped with multi-step voltageswitches and potentiometers for wirespeed adjusting to enable easy settingof welding parameters. It is possibleto adjust burn-back time and to setspot welding time in C170/C200/C250. The units are fan-cooled andequipped with thermal overloadprotection. As an option, OrigoMagC170/200/250 can be equipped withV/A digital meter and transformerfor CO 2heater.Power Smoothing DeviceAlthough OrigoMag C150/C170/C200/C250 are 1-ph units, PowerSmoothing Device gives themexcellent welding performancein CO 2and gas mixtures. PowerSmoothing Device provides assmooth a welding current as for a3-phase machines.Torch includedEach machine is equipped with agas-cooled ESAB MX Torch (MXL150v, MXL 200, MXL 270), andeach has ergonomic handles. Theyhave spring loaded contact pins inthe central Connector - except forESAB MXL 150v which is deliveredwith 2.5 m and is connected directlyto the power source.Optimum cooling of the torchesgives extended lifetime of the swannecks and the wear parts. Gas nozzlesare available in three differentversions - standard, straight andconical. This provide maximumflexibility and optimum lifetime.• Power Smoothing Device - excellent welding performancefor single phase machines.• Easy change of polarity- it may be used with bothconventional solid wire andself-shielding cored wire.• Easy setting of welding parameters- welding machines for everyone.• ESAB MX Torches - designed to provide the ultimatein convenience and versatility.Svetsaren no. 1 • 2005 • 37
Page 1 and 2: THE ESAB WELDING AND CUTTING JOURNA
Page 3 and 4: Orbital-TIG - a great wayto join pi
Page 5 and 6: joint volume is reduced by a factor
Page 7 and 8: Light mechanisation.Easy and cost-e
Page 9 and 10: Figure 4. Manufacturing of stainles
Page 11 and 12: Railtrac flexible tool for Dutchpip
Page 13 and 14: Submerged arc welding of steelsfor
Page 15 and 16: onshore wind towers, whereas the to
Page 17 and 18: Results of mechanical testingThe we
Page 19 and 20: Figure 1. Welding tool with seam tr
Page 21 and 22: Retrofitting of automaticwelding Sy
Page 23 and 24: Mechanised welding of pipelinesBy:
Page 25 and 26: such as that from a rutile flux-cor
Page 27 and 28: Cutting technology in shipbuildingB
Page 29 and 30: Status of plasma cutting.In the que
Page 31 and 32: Improved productivityin automated a
Page 33 and 34: A CENTURY OF INNOVATION16-pound (7
Page 35: NOMAD finalisedFigure 1. The bridge
Page 40: ESAB ABBox 8004 S-402 77 Gothenburg

MECHANISATION AUTOMATION - Esab

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?