Gypsy EP ARF Park Flyer - E-flite

More documents

Recommendations

Info

❍ 5. Unplug the servos from the receiver. Removethe servo arms that are not in use, using sidecutters. Place the servos into the fuselage withthe connectors towards the outside of thefuselage, and the servo arms towards the frontof the fuselage.❍ 6. Use a 1/16" (1.5mm) drill bit to drill thelocations for the servo mounting screws.16
❍ 7. Secure the servos using the screws providedwith your radio system.❍ 8. Pass the servo leads through the opening infront of the servos. Plug the servos into thereceiver, making sure the rudder and elevatorservos are in the correct channels. Plug thespeed control into the receiver at this time too.17
Page 1 and 2: Assembly Manual
Page 3 and 4: WarningAn RC aircraft is not a toy!
Page 5 and 6: Optional PartsPark 370 Brushless Mo
Page 7 and 8: Checking the Wing WashoutRequired P
Page 9 and 10: Join the Vertical Fin and Horizonta
Page 11 and 12: ❍ 4. Remove the covering from the
Page 13 and 14: ❍ 3. Separate the tail assembly f
Page 15: ❍ 3. Connect the servos and batte
Page 19 and 20: ❍ 2. Locate one of the control ho
Page 21 and 22: ❍ 7. Slide the micro pushrod keep
Page 23 and 24: ❍ 2. Slide one of the main wheels
Page 25 and 26: Motor Break-inRequired PartsMotorRe
Page 27 and 28: ❍ 4. Press the safety spinner ont
Page 29 and 30: Control ThrowsRequired PartsFuselag
Page 31 and 32: Center of GravityAn important part
Page 33 and 34: Compact enough for any small park,
Page 35 and 36: 3) At all flying sites a straight o

Gypsy EP ARF Park Flyer - E-flite

Create successful ePaper yourself

Delete template?

Save as template?