Gypsy EP ARF Park Flyer - E-flite

More documents

Recommendations

Info

Landing Gear InstallationRequired PartsFuselageMain landing gearWheels (2)Wheel retainers (2)Tailskid4-40 x 1/2" socket head cap screw#4 washerRequired Tools and AdhesivesMedium CAHex wrench: 3/32"Drill bit: 1/8" (3mm)❍ 1. Locate the main landing gear. Slide the gearinto the slot in the fuselage. Use a 4-40 x 1/2"socket head screw and #4 washer to securethe main landing gear.22
❍ 2. Slide one of the main wheels onto the landinggear. Secure the wheel using a plastic wheelretainer. A drop of medium CA on the outsideof the retainer will keep it in position. Repeatthis step for the other main wheel.❍ 3. Drill a 1/8" (3mm) hole in the bottom ofthe fuselage 2" (51mm) forward of the endof the fuselage.Note: Do not get CA between the wheel andlanding gear.23
Page 1 and 2: Assembly Manual
Page 3 and 4: WarningAn RC aircraft is not a toy!
Page 5 and 6: Optional PartsPark 370 Brushless Mo
Page 7 and 8: Checking the Wing WashoutRequired P
Page 9 and 10: Join the Vertical Fin and Horizonta
Page 11 and 12: ❍ 4. Remove the covering from the
Page 13 and 14: ❍ 3. Separate the tail assembly f
Page 15 and 16: ❍ 3. Connect the servos and batte
Page 17 and 18: ❍ 7. Secure the servos using the
Page 19 and 20: ❍ 2. Locate one of the control ho
Page 21: ❍ 7. Slide the micro pushrod keep
Page 25 and 26: Motor Break-inRequired PartsMotorRe
Page 27 and 28: ❍ 4. Press the safety spinner ont
Page 29 and 30: Control ThrowsRequired PartsFuselag
Page 31 and 32: Center of GravityAn important part
Page 33 and 34: Compact enough for any small park,
Page 35 and 36: 3) At all flying sites a straight o

Gypsy EP ARF Park Flyer - E-flite

Create successful ePaper yourself

Delete template?

Save as template?