Gypsy EP ARF Park Flyer - E-flite

More documents

Recommendations

Info

Attach the WingRequired PartsWingRequired Tools and AdhesivesHeat gunHex wrench: 3/32"❍ 2. Secure the wing to the fuselage using a 4-40 x1/2" socket head bolt and a #4 flat washer.❍ 1. Place the wing onto the fuselage by guidingthe wing dowel into the hole on theforward former.Note: The 4-40 socket head screw uses the3/32" hex wrench.8
Join the Vertical Fin and HorizontalStabilizerRequired PartsVertical finHorizontal stabilizerRequired Tools and AdhesivesMedium CASquareFelt-tipped penHobby knife❍ 1. Draw two lines on the top of the stabilizerextending back from the sides of the notch inthe front to the trailing edge. Use a square tomake the lines 90-degrees to the trailing edgeof the stabilizer.Note: The hole for the control horn will be on theleft side when the top is facing up.9
Page 1 and 2: Assembly Manual
Page 3 and 4: WarningAn RC aircraft is not a toy!
Page 5 and 6: Optional PartsPark 370 Brushless Mo
Page 7: Checking the Wing WashoutRequired P
Page 11 and 12: ❍ 4. Remove the covering from the
Page 13 and 14: ❍ 3. Separate the tail assembly f
Page 15 and 16: ❍ 3. Connect the servos and batte
Page 17 and 18: ❍ 7. Secure the servos using the
Page 19 and 20: ❍ 2. Locate one of the control ho
Page 21 and 22: ❍ 7. Slide the micro pushrod keep
Page 23 and 24: ❍ 2. Slide one of the main wheels
Page 25 and 26: Motor Break-inRequired PartsMotorRe
Page 27 and 28: ❍ 4. Press the safety spinner ont
Page 29 and 30: Control ThrowsRequired PartsFuselag
Page 31 and 32: Center of GravityAn important part
Page 33 and 34: Compact enough for any small park,
Page 35 and 36: 3) At all flying sites a straight o

Gypsy EP ARF Park Flyer - E-flite

Create successful ePaper yourself

Delete template?

Save as template?