Gypsy EP ARF Park Flyer - E-flite

More documents

Recommendations

Info

Battery InstallationRequired PartsFuselageBattery hatch4-40 x 1/2" socket head cap screw#4 washerRequired Tools and AdhesivesBatteryHex wrench: 3/32"❍ 1. Turn on the radio system and plug the batteryand speed control together. Place the batteryinto the battery compartment.❍ 2. Place the battery hatch onto the fuselage. Usea 3/32" hex wrench to install the 4-40 x 1/2"screw and #4 washer.28
Control ThrowsRequired PartsFuselageBatteryRequired Tools and AdhesivesRuler❍ 2. Check the movement of the elevator with theradio system. Moving the elevator stick downwill make the airplane elevator move up.❍ 1. Turn on the transmitter and receiver of your<strong>Gypsy</strong>. Check the movement of the rudderusing the transmitter. When the stick is movedright, the rudder should also move right.Reverse the direction of the servo at thetransmitter if necessary.29
Page 1 and 2: Assembly Manual
Page 3 and 4: WarningAn RC aircraft is not a toy!
Page 5 and 6: Optional PartsPark 370 Brushless Mo
Page 7 and 8: Checking the Wing WashoutRequired P
Page 9 and 10: Join the Vertical Fin and Horizonta
Page 11 and 12: ❍ 4. Remove the covering from the
Page 13 and 14: ❍ 3. Separate the tail assembly f
Page 15 and 16: ❍ 3. Connect the servos and batte
Page 17 and 18: ❍ 7. Secure the servos using the
Page 19 and 20: ❍ 2. Locate one of the control ho
Page 21 and 22: ❍ 7. Slide the micro pushrod keep
Page 23 and 24: ❍ 2. Slide one of the main wheels
Page 25 and 26: Motor Break-inRequired PartsMotorRe
Page 27: ❍ 4. Press the safety spinner ont
Page 31 and 32: Center of GravityAn important part
Page 33 and 34: Compact enough for any small park,
Page 35 and 36: 3) At all flying sites a straight o

Gypsy EP ARF Park Flyer - E-flite

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?