CNXT4236IH - At Andiron Fireplace Shop

7Appliance PreparationCAUTIONSharp Edges• Wear protective glovesand safety glasses duringinstallation.• Remove three remaining screws holding the platesurrounding fl ue. See Figure 7.3. Remove plate and setaside.A. Convert from Top Vent to Rear Vent• Remove the screw holding heat shield cover plate to topof appliance and set aside. See Figure 7.1Note: If the appliance is to be top vented discard this plateand replace the screw you removed. If the appliance is tobe rear vented, continue to the next step and Figure 7.2.Figure 7.3Cover Plate, Remove Screws• Remove four screws holding inner plate surrounding thefl ue. See Figure 7.4. Remove inner plate and discard.Figure 7.1Cover Plate, Top of Appliance• Remove the white insulation and set aside. SeeFigure 7.2.Figure 7.4Inner Plate, Top of ApplianceFigure 7.2Remove White InsulationHeatilator • Caliber CNXT Series • 4047-132 Rev O • 09/07 29