CNXT4236IH - At Andiron Fireplace Shop

B. Securing and Leveling the ApplianceWARNINGFire Risk!• Prevent contact with sagging, looseinsulation.• Do NOT install against combustiblematerials such as exposed insulation,plastic and insulation backer.The diagram shows how to properly position, level, and securethe appliance (see Figure 7.20). Nailing tabs are providedto secure the appliance to the framing members.• Rear venting - refer to Vent Clearances and Framing(Section 6) for hole location.• Place the appliance into position.• Level the appliance from side to side and front to back.• Shim the appliance as necessary. It is acceptable to usewood shims.• Bend out nailing tabs on each side.• Keep nailing tabs fl ush with the framing.• Secure the appliance to the framing by using nails orscrews through the nailing tabs.WARNINGFire Risk!• ALWAYS maintain specifi ed clearancesaround the appliance.• Do NOT notch into the framing aroundthe appliance spacers.Failure to keep insulation, framing or other materialaway from the appliance may cause fi re.CAUTIONDo NOT notch into the framing around the appliancespacers.Nailing Flanges(both sides)Figure 7.20 Proper Positioning, Leveling and Securing of anApplianceHeatilator • Caliber CNXT Series • 4047-132 Rev O • 09/07 33