Maintenance & Inspection Guide - Johnstech

Pad ROL 100ANote: The Green/RedElastomer and Gold-PlatedContact (153164) for mattetin packages are shown in theillustrations throughout thisdocument. For the NiPdAupackage configuration, refer topage 4 for the correct Contactand Elastomer configuration.Standard PartsMost Johnstech Contactorshave four standard partsthat comprise the Contactorassembly:· Housing· Contacts· Elastomers· Alignment Plate*A Manual Actuator is availablefor short-run testing andcharacterization.CONTACTOR COMPONENTSMethodologyDevice Under TestContactInner/Front ElastomerOuter/Back ElastomerLoad Board*An Alignment Plate is includedwith the Contactorfor all designs utilizing anAlignment Plate duringautomated test operation.All other designs include anAlignment Plate as part of theManual Actuator assembly.Leadbackers and AlignmentPlates work as matchedsets; changing either onemay require changing bothcomponents.**A Single-Latch VerticallyCompliant Manual Actuator(SL-VCMA), pictured here, isalso offered for select PadROL 100A Housing sizes.Contactor ComponentsDouble-Latch Vertically Compliant Manual Actuator(DL-VCMA Plus)**Alignment PlateHousingFully-Assembled Contactor4www.johnstech.com©2012 Johnstech International CorporationAll rights reserved.