1961-63 Thunderbird - Classic Auto Air

Locate (2) white wires tywraped to the discharge tube. Route along the discharge hose. Cut oneof the wires and attach female bullet connector provided and plug into the compressor clutchwire.Other wire route along suction hose and connect to blue clutch wire from the thermostat.Attach water valve to lower hose from theevaporator using (2) worm gear clamps.Other end of water valve attaches to thereturn line to the motor.Attach control cable to the water valve. Besure that temperature lever has full traveland that the valve closes completely.Short hose connects to supply line from themotor.CAUTION: CHECK AROUND ENGINE TO BE SURE THATTHERE IS NOTHING THAT WILL INTERFER WITH SAFE OPERATION OF THEVEHICLE.THE ENGINE COMPARTMENT OF YOUR SYSTEM IS COMPLETE.THE UNIT IS READY FOR EVACUATION AND CHARGING.THIS SHOULD BE DONE BY A QUALIFIED AND CERTIFIED AIRCONDITIONING TECHNICIAN.TO WATER PUMPNOTE:COMPRESSORIS SUPPLIEDWITH THECORRECT OILCHARGE. DONOT ADD OILTO SYSTEM.134a SYSTEMS24 oz OFREFRIGERANTRecommendthat power fuseis 25amp21