MODBUS TCP/IP PROTOCOL MANUAL - Maguire Products

Get Weight UnitsDescription: Returns the units that the blender is using to display totals, such as poundsor kilograms. This command is needed to interpret the Get Batch Info command.Command FormatOutput Byte Modbus Description Name Range MLAN Description0 Transaction ID 01 Transaction ID 02 Protocol ID 03 Protocol ID 04 Total Data Length 05 Total Data Length 66 Slave Address MLAN Address7 Function Code 3 or 48 Register Hi Command Code 85 Get Version Command9 Register Lo 010 Point Count Hi 011 Point Count Lo 1Response FormatInput Byte Modbus Description Name Range Description0 Transaction ID 01 Transaction ID 02 Protocol ID 03 Protocol ID 04 Total Data Length 05 Total Data Length 56 Slave Address MLAN Address7 Function Code 3 or 4 Top bit set on error8 Byte Count 29 Data Word 0 Hi Weight units 010 Data Word 0 Lo Weight units 0, 1, 2, or 40=pounds, 1=ounces,2=grams, 4=kilograms41