MODBUS TCP/IP PROTOCOL MANUAL - Maguire Products

More documents

Recommendations

Info

Set Batch WeightDescription: Sets the batch flag parameter and the batch weight.Command FormatOutput Byte Modbus Description Name Range MLAN Description0 Transaction ID 01 Transaction ID 02 Protocol ID 03 Protocol ID 04 Total Data Length 05 Total Data Length 116 Slave Address MLAN Address7 Function Code 168 Register Hi Command Code 83 Set Batch Weight Command9 Register Lo10 Register Count Hi 011 Register Count Lo 212 Data Byte Count 413 Data Word 0 Hi Batch Weight14 Data Word 0 Lo Batch Weight 0 to 65536Batch weight (pounds orkilograms only)(See "Get Weight Units"command for units)See note 215 Data Word 1 Hi Flag16 Data Word 1 Lo Flag 0, 1 or 20=no batch, 1=alarm & stop,2=alarm & cont.See note 1Response FormatInput Byte Modbus Description Name Range Description0 Transaction ID 01 Transaction ID 02 Protocol ID 03 Protocol ID 04 Total Data Length 05 Total Data Length 26 Slave Address MLAN Address7 Function Code 16 Top bit set on errorNOTE 1:A flag of 0 means to stop running batches. A flag of 1 means to sound the alarm andstop running at the end of the batch. A flag of 2 means to sound the alarm but continuerunning at the end of the batch.48
NOTE 2:Batch weight is given in pounds if "Get Weight Units" returns either pounds or ounces.If "Get Weight Units" returns either kilograms or grams, then batch weight is inkilograms.49
Page 1 and 2: MODBUS TCP/IP PROTOCOL MANUALSeptem
Page 3 and 4: SET STEADY STATE RATE 54SET TAG 55S
Page 5 and 6: Ethernet ConnectorThe Ethernet conn
Page 7 and 8: Summary of all MLAN commandsMLAN Co
Page 9 and 10: Modbus TCP/IP Communication for WSB
Page 11 and 12: Note: One potential source of confu
Page 13 and 14: Modbus TCP/IP Command ExampleThe ex
Page 15 and 16: Data CommandsClear TotalsDescriptio
Page 17 and 18: Get All ParametersDescription: Gets
Page 19 and 20: Note 1:Batch weight is given in pou
Page 21 and 22: Get DisplayDescription: Returns the
Page 23 and 24: Get ParameterDescription: Gets a si
Page 25 and 26: 13 Data Word 2 Hi Type Hopper 1 00
Page 27 and 28: 35 Data Word 13 Hi Setting Hopper 6
Page 29 and 30: Get StatusDescription: Returns the
Page 31 and 32: Note 1b - Output status for TWELVE
Page 33 and 34: Get Target Throughput & StatusDescr
Page 35 and 36: Get TotalsDescription: Returns the
Page 37 and 38: Response Format Type 2 - Twelve Com
Page 39 and 40: Get TypeDescription: Returns the so
Page 41 and 42: Get Weight UnitsDescription: Return
Page 43 and 44: Notes reference Send Keystroke Comm
Page 45 and 46: Command Format Type 1 - Four Compon
Page 47: Number66 Data Word 26 LoWork OrderN
Page 51 and 52: 35 Padding 036 One 137 Padding 038
Page 53 and 54: Set Remote KeypadDescription: Enabl
Page 55 and 56: Set TagDescription: Sets a tag valu
Page 57 and 58: Set Target ThroughputDescription: S
Page 59 and 60: Silence AlarmDescription: Has the s
Page 61 and 62: Response Format (Subcommand 1:stop
Page 63 and 64: Parameter Table from Four Component

MODBUS TCP/IP PROTOCOL MANUAL - Maguire Products

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?