MODBUS TCP/IP PROTOCOL MANUAL - Maguire Products

Stop Cycle / Stop RetryDescription: Either causes the WSB to abort the current cycle or the current dispense.Aborting the current cycle causes the WSB to start the next cycle.Aborting the current dispense causes the WSB to start dispensing thenext component.Command FormatOutput Byte Modbus Description Name Range MLAN Description0 Transaction ID 01 Transaction ID 02 Protocol ID 03 Protocol ID 04 Total Data Length 05 Total Data Length 76 Slave Address MLAN Address7 Function Code 168 Register Hi Command Code 27Stop Cycle / Stop / RetryCommand9 Register Lo Subcommand 1 or 21 = Stop Cycle; 2 = StopRetry10 Register Count Hi 011 Register Count Lo 012 Data Byte Count 0Response FormatInput Byte Modbus Description Name Range Description0 Transaction ID 01 Transaction ID 02 Protocol ID 03 Protocol ID 04 Total Data Length 05 Total Data Length 26 Slave Address MLAN Address7 Function Code 16 Top bit set on error62