SUBCOURSE EDITION - Modern Prepper

Step 10: Now, proceed to the other graticule intersections and plot their locations. Alwaysremember to plot the given measurements from the grid lines shown on DA Form 1932 and always plotfrom these grid lines toward the next higher grid line. Once all the graticule ticks and intersections havebeen plotted from DA Form 1932, you will have points that fall between each of the four corners and inthe interior of the grid. These points represent the graticule ticks and intersections along the map neatlines and the interior crosses.4. Drafting and labeling the projection. The hardest part of constructing map projections is nowcomplete. The remaining steps are relatively simple and involve symbolizing and labeling the projection.These steps are outlined and explained as follows:Step 1: Construct neat lines by connecting the projection corners and graticule intersections withstraight lines (fig 4-20). Seams simple enough! Using your straightedge and sharp 5-H pencil, connectthe plotted projection corners and graticule ticks with straight lines. If everything has been correctlyplotted, the graticule intersections on the east and west edges will be in a straight line between the northand south corners. The north and south neat lines will form parallel curves.Figure 4-20. Neat line with grid and graticule ticks.83