12.07.2015 Views

Captain Sim 'Legendary C-130' - Flight Tutorial - e-HAF

Captain Sim 'Legendary C-130' - Flight Tutorial - e-HAF

Captain Sim 'Legendary C-130' - Flight Tutorial - e-HAF

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

FS Station – www.fsstation.com- In the hydraulic system (R1 icon):1. BRAKE SELECT switch - EMERGENCYThat will force the airplane to supply auxiliary hydraulic pressure (rather than utility hydraulic pressure) to the brakes,allowing them to be used with the engines off.2. ANTI-SKID switch - OFFAnti-skid will not function when the brake system is operating from the auxiliary hydraulic pressure (engines off) or whenthe parking brake is set.- In the throttle quadrant (propeller icon):1. TEMP DATUM CONTROL VALVES switches - AUTOPermits normal operation of the electronic temperature datum control system.2. Condition levers, throttles – GRD STOP, GRD IDLEThis ensures the blade angle is set to minimum thrust and that the engines will not start. Nacelle preheat is operable inthis configuration.Before startAfter you have inspected the aircraft's interior and exterior, it's time to power it up and put some light into the darkcockpit. In this stage, we will configure several systems in order to get the aircraft ready for engine startup.We have basically two ways of powering the aircraft: using external power from an ground power cart or using thebattery. For this tutorial, we will use ground power, but you may also use the battery if you want to. Go to the <strong>Captain</strong><strong>Sim</strong> menu and activate the ground power unit - a green bar will appear to confirm your selection. It's time to power it upand start systems configuration.- In the electrical system (upper OH icon):FS Station – www.fsstation.comPage 2 of 20

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!