Model 24923 Installation Guide - Ready Remote

Mounting the antennaThe antenna position should be discussed with the vehicle owner prior to installation, since the antenna maybe visible to the vehicle’s operator.The best location for the receiver/antenna is centered high on either the front or rear windshield. For optimalrange, the antenna should be mounted vertically. It can be mounted horizontally in relation to the windshieldor under the dashboard away from metal, but range will be diminished. Window tint or dot matrix (smallblack dots at top of windshield) can also affect range, so this should be a consideration when determiningthe mounting location.After determining the best mounting location, follow these steps:1. Clean the mounting area with a quality glass cleaner or alcohol to remove any dirt or residue.2. Plug the receiver/antenna cable into the receiver/antenna.3. Mount the receiver/antenna using the supplied double-sided tape.4. Route the receiver/antenna cable to the control module and plug it into the four-pin antenna connector.Important: To achieve the best possible range, DO NOT leave the antennacable bundled under the dash. Always extend the cable full lengthduring installation, regardless of the antenna mounting location.© 2010 Directed Electronics. All rights reserved.23