Model 24923 Installation Guide - Ready Remote

Wiring connectionsMain Harness (H1), 9-pin connectorH1/1 LIGHT GREEN BLACK (-) 200mA FACTORY ALARM DISARMH1/2 GREEN/WHITE (-) 200mA FACTORY ALARM REARMH1/3 EMPTY NOT USEDH1/4 WHITE/BLUE (-) ACTIVATION INPUTH1/5 EMPTY NOT USEDH1/6 BROWN (-) 200mA HORN OUTPUTH1/7 RED/WHITE (-) 200mA TRUNK RELEASE (CHANNEL 2) OUTPUTH1/8 BLACK GROUNDH1/9 WHITE (+/-) LIGHT FLASH OUTPUTHeavy gauge relay harness, 6-pin connectorH2/1 PINK OUTPUT TO PRIMARY IGNITION CIRCUIT, 30A (+)H2/2 PURPLE OUTPUT TO STARTER CIRCUIT, 30A (+)H2/3 ORANGE OUTPUT TO ACCESSORY CIRCUIT, 30A (+)H2/4 RED (+) 30A HIGH CURRENT 12V INPUTH2/5 PINK/WHITE PROGRAMMABLE OUTPUT, 2nd IGNITION/ACCESSORY CIRCUIT 30AH2/6 RED (+) 30A HIGH CURRENT 12V INPUTDoor lock - 3 pin connector1 LIGHT BLUE (-) UNLOCK2 EMPTY NOT USED3 GREEN (-) LOCKAuxiliary harness (H3), 5-pin connectorH3/1 BLACK/WHITE (-) NEUTRAL SAFETY SWITCH INPUTH3/2 VIOLET/WHITE TACHOMETER INPUT WIREH3/3 BROWN (+) BRAKE SHUTDOWN INPUT WIREH3/4 GRAY (-) HOOD PIN SWITCH SHUTDOWN WIREH3/5 BLUE/WHITE (-) 200 mA 2ND STATUS/REAR DEFOGGERControl button (valet switch), 2-pin connector1 BLACK INPUT2 GREY OUTPUT© 2010 Directed Electronics. All rights reserved.7