User manuals - Newegg.com

Using the LOCKS menuNote : The V-Chip feature is available for the U.S. V-Chip systemonly. The Canadian V-Chip system is not supported.You can prevent others from viewing certain programs or channels byblocking them using the V-Chip feature.Selecting a passwordBefore you can use the V-Chip Feature to block programs and channels,you must select a password. The password you select preventsothers from changing the rating limits you set.To select your password and access the LOCKS menu:1. Press TV to select the TV mode.2. Press MENU, then press or to highlight the LOCKS menu.3. Press ▲ or ▼ to display the password entering mode.INPUT DISPLAYDisplayChannelNumbersTVMenu/EnterLOCKSNEW PASSWORDExit[0-9]:SELECT ENTER:SETEXIT:END4. Use the Channel Number buttons (0-9) to enter your password.If you are accessing the LOCKS menu for the first time, select afour-digit number to be your password. Press ENTER.LOCKSNEW PASSWORD[0-9]:SELECT ENTER:SETEXIT:END5. Enter the password again to confirm it, and then press ENTER.The LOCKS menu appears.If the wrong password is entered, “ERROR” blinks about 4seconds.CT-885LOCKSCONFIRM PASSWORDUsing the TV’s Features[0-9]:SELECT ENTER:SETEXIT:END6. You may now set up the LOCKS menu. See “Using the V-Chip(parental control) feature” (page 27), “Locking channels” (page 28),“Locking the video inputs” (page 28), “Setting the GameTimer TM ”(page 29) or “Using the panel lock feature” (page 29.)To change your password:1. Press TV to select the TV mode.2. Press MENU, then press or to display the LOCKS menu.3. Press ▲ or ▼ to display the password entering mode.4. Use the Channel Number buttons (0-9) to enter your password.Press ENTER. The LOCKS menu appears.5. Press ▲ or ▼ to highlight NEW PASSWORD and press todisplay the NEW PASSWORD menu.6. Use the Channel Number buttons (0-9) to enter a new code. PressENTER.7. Enter the password again to confirm it, and then press ENTER.8. Press EXIT to return to normal viewing.Note:If you forget your password, press DISPLAYfour times within five seconds while the TV isin password entering mode. This allows youto reset your password.Note:If the remote control does not operate your TV,press the “TV” button on the remote controland try again.263X70701A_En_p26-31263/7/06, 6:24 PM