Razz plus - Hot Tubs, Hot Tub

TROUBLESHOOTING GUIDEPROBLEM10. Motor will not start.(Continued)PROBABLE CAUSEI. Subnormal voltage.J. Locked shaft or impeller.K. Motor windings burned out.L. Defective starting switch insidemotor.REMEDYI. Call an electrician or your powercompany.J. *K. *L. *11. Motor stops. A. Motor overload condition.B. High temperature safety switchtripped.C. Selector switch failure.D. Relay failure.E. Inadequate supply wiring.A. Let cool for one hour. Motoroverload will reset if problempersists, see *Note.B. Reset button on heater afterwater has cooled; see *Note ifswitch continues to trip.C. *D. *E. Consult electrician to correctwiring to unit.12. Air Blower does not operate. A. Power off.B. ACCESSORY switch in OFF.C. House circuit breaker tripped, nopower to system.D. GFCI tripped.E. Faulty motor.A. Turn on power at service panel.B. Select other function.C. Reset circuit breaker.D. Reset GFCI.E. *13. Accessory Switch and systemswitch in off position, but motorand heater still operating.14. Timer will not activate spa.A. Timer is functioning.A. System and/or accessory switchis not in off position.B. Spa is up to temperature seton thermostat.A. Normal function. Turn timerto an off position, or resettabs in off position.A. Turn both system switch andaccessory switch to off position.B. Turn thermostat down. Ifthermostat is already at minimumsetting, and spa is at or abovethat temperature, timer willnot operate.*Note: The skills and tools necessary for the safe repair of this spa require the servicesof qualified service personnel. Contact your Jacuzzi Whirlpool Bath AuthorizedService Agent or Dealer.18