12.07.2015 Views

Concentrated Solar Power, Getting to the heart of energy - LEONI

Concentrated Solar Power, Getting to the heart of energy - LEONI

Concentrated Solar Power, Getting to the heart of energy - LEONI

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

34 ICON Instrumentation Cableswww.leoni-communication-infrastructure.comIntrumentation Cable PLTC/ITCRE-2X(St)H PiMF, Multi-Pair, Individual & Collective screen, 300 V, UL 13/UL2250AdvantagesHalogen freeFlame retardantUV resistantOil resistantApplicationUL-listed power limited tray cable in compliance with NEC article725.154, for use in hazardous classified locations class I and classII division 2 acc. <strong>to</strong> NEC 501.10(B) and NEC 502.10(B).Recommended for indoor and outdoor installation, in dry andwet locations. Not for direct burial.ConstructionConduc<strong>to</strong>r: plain annealed copper wire, stranded,size: AWG 18 / 7Insulation: cross-linked polyethylene XLPEColour code: black / white, continuously numbered on whitecore (1, 2, …) for multielement cableWrapping: at least 1 layer <strong>of</strong> plastic tapeIndividual screen: plastic coated aluminium tape in contactwith tinned copper drain wireCollective screen: plastic coated aluminium tape in contactwith tinned copper drain wireOuter sheath: low smoke zero halogen flame retardantcompound LSZH, blackTechnical dataFlame propagation:Test on single cableUL13 (VW-1)Test on bunched cables UL 1685 (vertical tray)Gas/vapour tightness outer sheath: NEC 501,15 (D) und (E)Limiting Oxygen Index (LOI): ASTM D 2863 (min. 30 %)Flammability temperature (FT): ISO 4589-3 ann. A(min. + 250 °C)Amount <strong>of</strong> halogen acid gas: IEC 60754-1 (0 %)Degree <strong>of</strong> acidity <strong>of</strong> gases: IEC 60754-2 (pH > 4.3,C < 10µS/mm)Oil resistance: ICEA S-73-532Sunlight resistance: UL 1581 Section 1200Temperatur range:(during operation) – 40 °C up <strong>to</strong> + 90 °C(during installation) – 5 °C up <strong>to</strong> + 50 °CMinimum bending radius: 7.5 × cable diameter*(Test temperature: + 60 °C; test duration 4 h. Tensile strength and elongation atbreak: at least 60 % <strong>of</strong> <strong>the</strong> values before aging)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!