THE GREAT KNOWLEDGE QUIZ - Duropal

duroPal-HPl-worktoPs
Product/Quality Radius
in mm
Classic profile 4) 6.0 VV, PF, FG, TC, MP,
Surface textures Sizes in mm Thickness Span in mm 2) Tolerance in mm
SM, MS, HS 1) , CT,
TR, RU
Quadra profile4) 3.0 VV, PF, FG, TC, MP,
SM, MS, HS1)3) , CT,
TR, RU
Water-safe profile4) 10.5/13.0 VV, PF, FG, TC, MP,
SM, MS, HS1) , CT,
TR, RU
Square edged4) – VV, PF, FG, TC, MP,
SM, MS, HS1) , HX5) ,
CT, TR, RU
Length Width 6) 18 28 38 49 58 Length Width 7) Thickness
5,300/4,100 Rounded on
one side:
600/900/
1,200
Rounded on
both sides:
640/1,000
Rounded on
one side:
600/900/
1,200
Rounded on
both sides:
670/900
Rounded on
one side:
640/1,000
Rounded on
both sides:
900/1,200
Rounded on
one side:
600/900/
1,200
600/900/
1,200
■ ■ ± 5.00 ± 0.55 ± 0.40
■ ■
■ ■ ■ ■ ■
■
■ ■
■ ■
■ ■
■ ■ ■ ■ ■
1) Surface texture HS only available in length 4,100 mm.
2) Chipboard core P2 with chipboard thickness 18, 28, 38, 49 and 58 mm, Hydrofuge (P3) with chipboard thickness 28 and 38 mm.
3) Surfaces with chipboard core of 18 mm not possible.
4) Limited range of decors available.
5) ® HX surfaces in Duropal-topX quality, limited range of decors available, not possible in microplus .
6) Non-standard widths on request.
7) Tolerance applies for width 600 mm; each further 100 mm increase in width, additional ± 0.05mm.
Glue: D3, according to DIN EN 204
Also available in
Duropal microplus ®
HPL World _ 119