Aqualab english manual

More documents

Recommendations

Info

Oxygen mix ratio setting modeThis mode is disabled during the first ten minutes of Surface time and during the dive.Operation of switches(beginning from “ Surface Mode”)• Switch APress this to switch or to return to dive plan mode.When in dive plan mode, "30 feet" ("9 m") is displayed as the depth rank.• Switches A + BIn dive plan mode press and keep pressing switch A then press and keep pressingswitch B for at least 6 seconds in order to enter function oxygen mix ratio settingmode.• Switch BPress this switch to increase the currently set oxygen mix ratio in 1% steps. When thissetting exceeds 50%, the mode automatically switches to Air mode.• Switch C (Water detection switch)When water is detected, the computer switch to dive mode automatically.• Auto returnThe AQUALAB dive computer automatically switches to surface mode if no switchesare pressed for about 1 or 2 minutes.Description of functionsThe functions of the oxygen mix ratio setting mode are further described below.• FO 2Values can be set from 21% (Air) to 50% in 1% steps.When the current setting is between 22% and 50%, the NITROX indicators are shown.13
Dive Log Modedisplay 1display 2Display 1• Dive date: Date of dive• Entry time: Time at start of dive• Exit time: Time at end of dive• Maximum depth: Bottom depth measurement during current diveDisplay 2• Log n°: Log number on dive date• Dive time: Elapsed dive time• FO 2 : Oxygen mix ratio setting for current dive. This ratio is set viathe oxygen mix ratio setting functions.• Water temperatureAt maximum depth: Temperature of water when at maximum depthN.BWhen below 23F (-5°C): LoWhen above 104F (40°C): HiCAUTION !!!Replacing the battery will erase all log data. Therefore, be sure to transfer log datato a logbook or PC before replacing the battery.14
Page 4 and 5: Aqualab Limited Warranty• Seac Di
Page 6 and 7: • Indication Mode.The arrow turne
Page 8 and 9: Description of functionsThe followi
Page 10 and 11: CAUTION !!!• Residual nitrogen ba
Page 12 and 13: Description of functionsThe functio
Page 16 and 17: Operation of switches(beginning fro
Page 18 and 19: Oxygen toxicity exposure level warn
Page 20 and 21: Description of functionsThis functi
Page 24 and 25: • No decompression dive modeThe f
Page 26 and 27: • Ascent rate warningThis display
Page 28 and 29: Residual oxygen level warningCAUTIO
Page 30 and 31: Time setting modeThis mode is not d
Page 32 and 33: Change mode of measurement unitsThi
Page 34 and 35: Diving-related cautions• Be sure
Page 36 and 37: The computer will not switch to div

Aqualab english manual

Create successful ePaper yourself

Delete template?

Save as template?