Aqualab english manual

Time setting modeThis mode is not displayed during the first ten minutes of Surface timeOperation of switches(beginning from “surface mode”)• Switches A + BFrom surface mode press and keep pressing these two switches for at least 5seconds in order to enter function time setting mode.• Switch APress this switch to cycle through the column settings (cycle: hours minutes seconds year month date). Press this switch while the column is set to "date"to return to surface mode.• Switch BPress this switch to scroll the numbers in each column.Press and hold for fast scrolling.• Switch C (Water detection switch)When water is detected, the computer switches to dive mode automatically.• Auto returnThe AQUALAB dive computer automatically switches to surface mode if no switchesare pressed for about five or six minutes.Description of functionsThis mode includes functions for changing the current time, date, or year settings.• Current timeThe current time (hour and minute only; seconds are shown only during time setting mode)is shown in 24-hour format.• Current month, date and yearThe current month, date and year are shown based on a fully automatic calendar that starts onJanuary 1, 1997 and ends on December 31, 2050.29