Aqualab english manual

More documents

Recommendations

Info

Time setting modeThis mode is not displayed during the first ten minutes of Surface timeOperation of switches(beginning from “surface mode”)• Switches A + BFrom surface mode press and keep pressing these two switches for at least 5seconds in order to enter function time setting mode.• Switch APress this switch to cycle through the column settings (cycle: hours minutes seconds year month date). Press this switch while the column is set to "date"to return to surface mode.• Switch BPress this switch to scroll the numbers in each column.Press and hold for fast scrolling.• Switch C (Water detection switch)When water is detected, the computer switches to dive mode automatically.• Auto returnThe AQUALAB dive computer automatically switches to surface mode if no switchesare pressed for about five or six minutes.Description of functionsThis mode includes functions for changing the current time, date, or year settings.• Current timeThe current time (hour and minute only; seconds are shown only during time setting mode)is shown in 24-hour format.• Current month, date and yearThe current month, date and year are shown based on a fully automatic calendar that starts onJanuary 1, 1997 and ends on December 31, 2050.29
<strong>Aqualab</strong> specificationsClock precisionAccurate to within+/- 30 seconds per averagemonthWater depth precision +/- 3%Temperature precision +/- 4° F (2° C)Water depth measurementRange is 0 to 328 feet ( 0 to 99,9 meters)Dive depth controlInterval is one secondDive time measurementRange is 0 a 599 minutesAltitude measurementRange is 0 to 19,685 Feet. (6.000 meters)Interval is 10 minutes.Altitude measurement controlAll modes except Dive mode and Time setmodeWater temperature measurementRange is 23°F to 104°F (–5° C to +40° C.)23°F to 104°F (–5° C to +40° C.).Operating temperature rangeDisplay appears faded when at lowtemperatures.Temperature controlInterval is 60 secondsWater resistanceUp to 328 feet (100 meters).7 yearsnote:Battery life.calculated based on 50 dives (1 hour each)peryear, with one ten-second alarm output perdive,Warning!!!Battery life is always approximate anyway.Several reasons can influence the battery life (environmental conditions, continuous use ofsurface functions (Dive-Log, Planning, Transfer mode, etc. etc.), wet contacts.30
Page 4 and 5: Aqualab Limited Warranty• Seac Di
Page 6 and 7: • Indication Mode.The arrow turne
Page 8 and 9: Description of functionsThe followi
Page 10 and 11: CAUTION !!!• Residual nitrogen ba
Page 12 and 13: Description of functionsThe functio
Page 14 and 15: Oxygen mix ratio setting modeThis m
Page 16 and 17: Operation of switches(beginning fro
Page 18 and 19: Oxygen toxicity exposure level warn
Page 20 and 21: Description of functionsThis functi
Page 24 and 25: • No decompression dive modeThe f
Page 26 and 27: • Ascent rate warningThis display
Page 28 and 29: Residual oxygen level warningCAUTIO
Page 32 and 33: Change mode of measurement unitsThi
Page 34 and 35: Diving-related cautions• Be sure
Page 36 and 37: The computer will not switch to div

Aqualab english manual

Create successful ePaper yourself

Delete template?

Save as template?