INSTALLATION & OPERATING INSTRUCTIONS ... - Johnstone Supply

INDEXWARNINGS & GENERAL INFORMATION 4INSTALLATION 5LOCATION 6, 7COMBUSTION AIR 7 - 9VENTING 9,10HORIZONTAL THROUGH THE WALL VENTING 11, 12JOINING PIPE, DRAIN CONNECTIONS 12, 13GAS PIPING AND GAS PIPE CAPACITY TABLE 13, 14CIRCULATING AIR SUPPLY, RETURN AIR 15ELECTRICAL SUPPLY AND CONTROL VOLTAGE CONNECTIONS 16, 17RATING THE FURNACE 17, 18TIMING THE GAS METER, MAIN BURNER ADJUSTMENT 18, 19SAFETY CONTROLS 19 - 21CIRCULATING AIR FILTERS 21TEMP RISE, SERVICE INSTRUCTIONS 21, 22SEQUENCE OF OPERATION, REMOVING AN EXISTING APPLIANCE 22 - 24INSPECTING AND CLEANING THE HEAT EXCHANGER 24, 25BLOWER OFF DELAY, EAC CONTROL, HUMIDIFIER CONTROL 25WIRING DIAGRAMS 26, 27LIGHTING INSTRUCTIONS 28THIS FURNACE CONTAINS ELECTRONIC COMPONENTS WHICH REQUIRE A DEFINITE GROUND. PROVISIONSARE MADE FOR CONNECTION OF THE GROUND. IF THIS PRODUCT IS NOT PERMANENTLY ANDPOSITIVELYGROUNDED NUMEROUS SERVICE CALLS MAY RESULT. A DEDICATED GROUND FROM THE MAINPOWER SUPPLY OR AN EARTH GROUND MUST BE PROVIDED.IO-1763