EEG DE285 HD Caption Decoder/VANC Monitor - EEG Enterprises

DE285 HD Caption Decoder/VANC Monitoring present to not present or vice versa, and “DataChange,” which triggerswhen the packet presence remains the same, but the data withinthe packet has changed. The events are evaluated on a per–field basis.After selecting a value for DID/SDID and Trigger On, click Add to beginlogging occurrences of the Log Trigger.To set any of the Alarms, click the box to the left of the desired Alarm.After selecting all Log Triggers and Alarms of interest, click Apply andthen OK to begin logging the selected Log Triggers and Alarms and toreturn to the Log Viewer. To disregard the changes made, click Cancelto return to the Log Viewer.The available alarms are grouped into three categories: General Alarms,Caption Pair Alarms and Error Alarms.General AlarmsThere are five alarms in the General Alarms category that can be usedto get an overview of possible problems.Alarm NameUnknown PacketAFD on Multiple LinesNo VideoInvalid V-Chip RatingNo CaptionsDescriptionSets an alarm to go off when a packet cannotbe recognized by the DE285 as a known type.Sets an alarm that goes off when there ismore than one AFD packet in a single videofield.Sets an alarm that goes off when there is novideo signal or the video cannot be displayed.Sets an alarm that goes off when the V-Chiprating is not present or is not valid.Sets an alarm that goes off when there is no6101 VANC packet present.Caption Pair AlarmsThere are five alarms in the Caption Pair Alarms category that can beused to detect when certain combinations of caption channels are active.Copyright ©2009-2011 EEG Enterprises, Inc.All rights reserved.29