Structural Design and Response in Collision and Grounding

Accidental Grounding and Collision”, 1998 SNAMEAnnual Meeting, November 1998.[7] Brown, A. and Amrozowicz, M., “TankerEnvironmental Risk - Putting the Pieces Together”,SNAME/SNAJ International Conference on Designsand Methodologies for Collision and GroundingProtection of Ships, August 1996.[8] Card, J. C., “Effectiveness of Double Bottoms inPreventing Oil Outflow from Tanker Double Bottoms”,Marine Technology, January 1975.[9] ISSC, Report by Specialist Panel V.4 – StructuralDesign Against Collision and Grounding, Proceedingsof the 13 th International Ship and Offshore StructuresCongress 1997, Trondheim, Norway, 1997.[10] W. Abramowicz and M. Sinmao, “User’s Manualand Modeling Guide for the Program DAMAGE, JointMIT-Industry Program on Tanker Safety, Report No.66, June 1999.[11] B. Cerup Simonsen and T. Wierzbicki. “GroundingBottom Damage and Ship Motion over a Rock”. Int. J.of Offshore and Polar Engineering, Vol. 6, no. 3, Sep.1996.[12] B. Cerup Simonsen, “Mechanics of ShipGrounding”, PhD thesis, Department of NavalArchitecture and Offshore Engineering, the TechnicalUniversity of Denmark, February 1997.[13] B. Cerup Simonsen, “Ship Grounding on Rock: ITheory”, Marine Structures, Vol. 10, pp. 519-562,1997[14] B. Cerup Simonsen, “Ship Grounding on Rock: IIValidation and Application”, Marine Structures, Vol.10, pp. 563-584, 1997.[15] Wang, G., Ohtsubo, H., and Liu D., “Simple Methodof Predicting the Grounding Strength of Ships”,Journal of Ship Research, Vol. 41, No. 3, Sept. 1997.[16] B. Cerup Simonsen. “DAMAGE Theory Validation”,Joint MIT-Industry Program on Tanker Safety, Reportno 63, May 1998.[17] Tikka, K.K., and Chen Y.J., “Prediction of StructuralResponse in Grounding – Application to StructuralDesign”, SSC/SNAME Ship Structural SymposiumJune 13-14, 2000.[18] Giannotti, J.G., Johns, N., Genalis, P. and VanMater, P.R., “Critical Evaluations of Low-Energy shipCollision Vol. I - Damage theories and DesignMethodologies”, Ship Structure Committee Report No.SSC-284, 1979[19] Simonsen, B.C., “Theory and Validation for theDAMAGE Collision Module”, Joint MIT-IndustryProgram on Tanker Safety, Report No. 67, June 1999.[20] Paik, J.K., et al, "On Rational Design of Double HullTanker Structures against Collision”, 1999 SNAMEAnnual Meeting, 1999.[21] Paik, J.K. and Pedersen, P.T., "Modeling of theInternal Mechanics in Ship Collisions", OceanEngineering, Vol. 23, No. 2, pp. 107-142, 1996.[22] Chen, D., “Simplified Collision Model (SIMCOL)”,Dept. of Ocean Engineering, Virginia Tech, Master ofScience Thesis, May 2000.[23] Hutchison, B.L., “Barge Collisions, Rammings andGroundings - an Engineering Assessment of thePotential for Damage to Radioactive Material TransportCasks”, Report No. SAND85-7165 TTC-05212, 1986.[24] Rosenblatt & Son, Inc, “Tanker Structural Analysisfor Minor Collision”, USCG Report, CG-D-72-76,1975.[25] McDermott, J.F., et al, “Tanker Structural Analysisfor Minor Collisions”, SNAME Transactions, Vol. 82,pp. 382-414, 1974.[26] Minorsky, V. V. (1959) “An Analysis of ShipCollisions with Reference to Proteciton of NuclearPower Plants,” Journal of Ship Research.[27] Reardon, P. and Sprung, J.L., “Validation ofMinorsky’s Ship Collision Model and Use of the Modelto Estimate the Probability of Damaging a RadioactiveMaterial Transportation Cask During a Ship Collision”,Proceedings of the International Conference on Designand Methodologies for Collision and GroundingProtection of Ships, San Francisco, August 1996.[28] Crake, K., “Probabilistic Evaluations of Tanker ShipDamage in Grounding Events”, Naval Engineer Thesis,MIT, 1995.[29] Pedersen P.T. and Zhang S. “On Impact Mechanicsin Ship Collisions”, Marine Structures, Vol. 11, pp.429-449, 1998.[30] Vakkalanka, Suryanarayana, “Simplified Bow Modelfor a Striking Ship in Collision”, Dept. of OceanEngineering, Virginia Tech, Master of Science Thesis,July 2000.[31] Reckling, K.A. (1983), "Mechanics of Minor ShipCollisions", International Journal of ImpactEngineering, Vol. 1, No. 3, pp. 281-299.[32] Akita, M. and Kitamura, K. (1972), “A Study onCollision by an Elastic Stem to the Side Structure ofShips”, Trans. SNAJ, 131, 307-317.[33] Valsgard, S. and Pettersen, E. (1982), "SimplifiedNon-Linear Analysis of Ship/Ship Collisions",Norwegian Maritime Research, No. 3, pp. 2-17.[34] Pedersen, P.T., et al, "Ship Impacts: BowCollisions", International Journal of ImpactEngineering, Vol. 13, No. 2, pp. 163-187, 1993.[35] Amdahl, J., “Energy Absorption in Ship-PlatformImpacts”, Dr. Ing. Thesis, Report No. UR-83-84, TheNorwegian Institute of Technology, Trondheim, 1983.[36] Yang, P. D. C., and Caldwell, J. B., “CollisionEnergy Absorption of Ships’ Bow Structures,”International Journal of Impact Engineering, Vol. 7,No. 2, pp. 181-196, 1988.[37] Abramowicz, W., “Crush Resistance of “T”, “Y”,“X” Sections,” Joint MIT-Industry Program on TankerSafety, Report #24, 1994.26