900-C Conductivity, TDS, Resistivity, Ratio, Meter - TPS

More documents

Recommendations

Info

61.8 Unpacking InformationBefore using your new 900-C, please check that the following accessories have been included:Part NoStandard Kit…1. 900-C Conductivity/TDS/Resistivity/Ratio Meter .... 1221022. k=1.0 Conductivity Sensor ....................................... 1222063. Temperature/ATC Sensor......................................... 1212454. 2.76mS/cm Conductivity Standard, 200mL .............. 1223065. Plug-Pack Power Supply .......................................... 1300446. 900-C Handbook...................................................... 130050Options that may have been ordered with your 900-C…1. Flexible arm type electrode holder............................ 1300882. RS232 Serial Interface Option (includes cable)......... 1300293. Recorder Output Option (includes cable).................. 1300284. RS232 PLUS Recorder Output Option...................... 130049(includes cable)5. Communication software for Windows 3.1,.............. 13008695, and NT6. Communication software for DOS ........................... 1300757. RS232 Printer........................................................... 1300318. Platinizing solution, 20mL........................................ 122300Optional Sensors…1. k=0.1 Conductivity Sensor ....................................... 1222042. k=10 Conductivity Sensor ........................................ 1222023. k=0.1 Conductivity + Temperature Sensor ............... 1222254. k=1.0 Conductivity + Temperature Sensor ............... 1222275. k=10 Conductivity + Temperature Sensor ................ 1222236.Other spares…7. RS232 Interface Cable.............................................. 1300228. Recorder Cable......................................................... 1300219. RS232 PLUS Recorder Cable................................... 130030
71.9 SpecificationsRangesMode k=0.1 Sensor k=1.0 Sensor k=10 Sensor User k factorConductivity,Siemens/cm0 to 2.000 µS/cm0 to 20.00 µS/cm0 to 200.0 µS/cm0 to 2000 µS/cm0 to 20.00 mS/cm0 to 20.00 µS/cm0 to 200.0 µS/cm0 to 2000 µS/cm0 to 20.00 mS/cm0 to 200.0 mS/cm0 to 200.0 µS/cm0 to 2000 µS/cm0 to 20.00 mS/cm0 to 200.0 mS/cm0 to 2000 mS/cm5 ranges,depending onactual k factorConductivity,Siemens/metre0 to 200.0 µS/m0 to 2000. µS/m0 to 20.00 mS/m0 to 200.0 mS/m0 to 2000 mS/m0 to 2000. µS/m0 to 20.00 mS/m0 to 200.0 mS/m0 to 2000 mS/m0 to 20.00 S/m0 to 20.00 mS/m0 to 200.0 mS/m0 to 2000 mS/m0 to 20.00 S/m0 to 200.0 S/m5 ranges,depending onactual k factorTDS0 to 1.000 ppM0 to 10.00 ppM0 to 100.0 ppM0 to 1000 ppM0 to 10.00 ppK0 to 10.00 ppM0 to 100.0 ppM0 to 1000 ppM0 to 10.00 ppM0 to 100.0 ppM0 to 100.0 ppM0 to 1000 ppM0 to 10.00 ppK0 to 100.0 ppK0 to 1000 ppK5 ranges,depending onactual k factorResistivity 0.50 to 99.99MΩ.cm50 to 9999KΩ.cm5.0 to 999.9KΩ.cm0.50 to 99.99KΩ.cm50 to 9999Ω.cm50 to 9999.KΩ.cm5.0 to 999.9KΩ.cm0.50 to 99.99KΩ.cm50 to 9999Ω.cm5.0 to 999.9Ω.cm5.0 to 999.9KΩ.cm0.50 to 99.99KΩ.cm50 to 9999Ω.cm5.0 to 999.9Ω.cm0.50 to 99.99Ω.cm5 ranges,depending onactual k factorRatio 0.000 to approx1.5001.50 to approx15.00(depending on spanof sensor)0.000 to approx1.5001.50 to approx15.00(depending on spanof sensor)0.000 to approx1.5001.50 to approx15.00(depending on spanof sensor)Ratio mode notavailable for userk factor.TemperatureRangeResolutionAccuracyCalibrationTemp. Sensor Offset RangeGeneral SpecificationsTemperature CompensationCond. Sensor Span RangeMemoryAutomatic LoggingRS232 Port (optional)ClockGood Laboratory PracticesPowerDimensions: -10.0 to 120.0 O C: 0.1 O C: ±0.2 O C: Automatic calibration: -10.0 O C to +10.0 O C: Automatic, 0 to 100 O C: k=0.1 Sensor : k=0.075 to k=0.133k=1.0 Sensor : k=0.75 to k=1.33k=10 Sensor : k=7.5 to k=13.3User k factor : ±25% of nominated k factor: 2300 readings including date and time: User-set for one reading every 1 to 90 seconds, minutes or hours.: 300, 1200 & 9600 baud.8 bits, no parity, 1 stop bit, XON/XOFF Protocol.: Calendar clock displays date, month, year, hours, minutes & seconds.: Date, Time and Value of last Conductivity, TDS, Resistivity, Ratio andTemperature calibration are stored separately for k=0.1, k=1.0, k=10and user-selected k factor sensors. This information can be recalled orsent to the optional RS232 port at any time.: 12V DC, 50mA. Plug-pack power supply is included in standard kit.: 270 x 210 x 75 mm
Page 5: 1.3 Menu and Function KeysPress the
Page 9 and 10: 2. 900-C Menu StructureA detailed b
Page 11 and 12: 3. Conductivity Mode3.1 Selecting C
Page 13 and 14: 3.7 Setting the Conductivity sensor
Page 15 and 16: 3.9 Conductivity Calibration Notes1
Page 17 and 18: 4.5 Setting the ATC Slope for unkno
Page 19 and 20: 4.8 TDS CalibrationBefore attemptin
Page 21 and 22: 5. Resistivity Mode5.1 Selecting Re
Page 23 and 24: 5.6 Setting the Resistivity sensor
Page 25 and 26: 5.8 Resistivity Calibration Notes1.
Page 27: 7. When the reading has stabilised,
Page 30 and 31: 308.2 Failed CalibrationIf calibrat
Page 32 and 33: 329. Notepad Function9.1 Recording
Page 34 and 35: 3410. Automatic DataloggingThe 900-
Page 36 and 37: 3611. RS232 PortThis section is app
Page 38 and 39: 3811.6 Data FormatData is returned
Page 40 and 41: 4012. Recorder PortThis section is
Page 42 and 43: 4214. Initialising the 900-CIf the
Page 44 and 45: 44Conductivity, TDS and Resistivity
Page 46 and 47: 4617. Appendices17.1 Selecting Auto
Page 48 and 49: 48Notes1. If a Conductivity sensor
Page 50 and 51: 5017.4 Care, Cleaning and Maintenan
Page 52 and 53: 5217.6 Replatinizing Conductivity S
Page 54: 5418. WarrantyTPS Pty. Ltd. guarant

900-C Conductivity, TDS, Resistivity, Ratio, Meter - TPS

Create successful ePaper yourself

Delete template?

Save as template?