EZ Series Touchpanel Hardware manual.indb - EZAutomation

EU InformationEZ Series Touch Panel is manufactured in compliance with European Union (EU) Directives andcarries the CE mark. EZ Series Touch Panel has been tested under CE Test Standard #EN55011,and is listed under UL File #E209355. The following information is provided to comply with EU documentationrequirements.Please NOTE: Products with CE marks perform their required functions safelyand adhere to relevant standards as specified by EU directives provided they areused according to their intended purpose and that the instructions in this manualare adhered to. The protection provided by the equipment may be impaired ifthis equipment is not used in accordance with this manual. Only replacementparts supplied by EZAutomation or its agents should be used.TechnicalSupportConsult EZ Series Touch Panel Editor Programming Software Help or you mayfind answers to your questions in the operator interface section of our web site@ www.EZAutomation.net. If you still need assistance, please call our technicalsupport at 1-877-774-EASY or FAX us at 1-877-775-EASY.SELV CircuitsAll electrical circuits connected to the communications port receptacle are ratedas Safety Extra Low Voltage (SELV).EnvironmentalSpecificationsOperating Temperature6” White on Blue & Mono non-expandable ................................0 to 45 °C6” Color ...................................................................................0 to 50 °C6” Color TFT ...............................................................................0 to 55 °C8” Color ...................................................................................0 to 50 °C8” Color TFT ...............................................................................0 to 55 °C10” Color ...................................................................................0 to 55 °C15” Color ...................................................................................0 to 55 °CStorage Temperature6” White on Blue & Mono non-expandable ...........................-20 to +60 °C6” Color ..............................................................................-25 to +60 °C6” Color TFT ..........................................................................-25 to +65 °C8” Color ..............................................................................-25 to +60 °C8” Color TFT ..........................................................................-25 to +65 °C10” Color ..............................................................................-25 to +65 °C15” Color ..............................................................................-25 to +65 °COperating Humidity ....................................... 10–95% R.H., noncondensingAir Composition ............................................. No corrosive gases permittedPreventativeMaintenanceand CleaningNo preventative maintenance is required. The EZ Series Touch Panel touchscreenshould be cleaned as needed with warm, soapy water. See Chapter 5, Maintenance,for a list of compatible/incompatible chemicals and compounds.viii