Cambridge Face, DVS - Instructions - Avalon

Cambridge Face Black Paint # 99300452 Black Enamel # 99300453CHECK CONDITION OF SHIPMENTUpon receipt of this kit, check the condition of the packaging. Damage to the package should be noted on the carrier's freightreceipt. Any damage claims as a result of shipping must be handled through the shipper. Travis Industries will provide assistancein resolving shipping claims or replacing items not included in the package. Please report any missing items immediately.COMPATIBILITY¥ Travis Ind. DVS Insert ¥ Travis Ind. DVS FireplacePACKING LIST¥ Face¥ Four 10-24 Screws¥ Two Face Mounting BracketsINSTALLATION INSTRUCTIONS! Turn the gas control valve to "OFF" priorto conducting any service.1 The log set, coals, and glass must beinstalled prior to installing the face (on theDVS Insert, the panels must be installed aswell).HINT: It is easiest to install the facemounting brackets with the glass removed.2 Install the face mounting bracketsfollowing the directions to the right3 Install the face following the directionsbelow.aGrasp the face by the pillars.TOOLS REQUIRED¥ 3/8" Nutdriver3/8" NutdriverAttach theface mountingbracket withthe fourscrewsincluded withthe face.NOTE:There is a left and a right face mountingbracket - make sure the hooks on thebracket are offset to the outside.NOTE:The glass can not be removed withoutremoving the face. However, with the slideoffface, this process is quick and easy.bLine up the edge of the glass withthe opening on the face. Move theface forward until the tabs on theface are over the hooks on the facemounting brackets.cSlide the face down, securing theface at four corners.Page 1 of 210850 117th Place N.E. Kirkland, WA 98033Printed March 18, 1998

Cambridge Face Black Paint # 99300452 Black Enamel # 99300453FACING CONSIDERATIONSCambridge Face Dimensions2-1/2Ó34-3/8Ó33Ó21-3/4ÓCLEARANCES:Face to Sidewall 6ÓFace to Mantel 17ÓFace to Side Facing 6ÓFace to Top Facing 10ÓHearth Extension (front) 12ÓHearth Extension (sides) 0ÓCombustibles to Front 36ÓNOTE: follow all directionsand requirements listed inthe ownerÕs manual.DVS FireplacesSide ViewWood SubFloorNOTE: The facing {above the face mustbe flush for 1/2Ó to allow the face to beslid in place.DVS FireplaceCambridge Face1/2" Cement Board & 3/8" thick tile (tucked behind the face)3/8" Thick Tile1-1/2"Base of FireplaceTwo 1/2"Cement Boards2ÓPage 2 of 210850 117th Place N.E. Kirkland, WA 98033Printed March 18, 1998