564 IronWorks Face Installation Instructions (SKU 95400432) - Lopi
564 IronWorks Face Installation Instructions (SKU 95400432) - Lopi
564 IronWorks Face Installation Instructions (SKU 95400432) - Lopi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>564</strong> <strong>IronWorks</strong> <strong>Face</strong><strong>Installation</strong> <strong>Instructions</strong>Compatibility<strong>IronWorks</strong> <strong>Face</strong> w Barrier (new) Bronze 95400436 Burnish 95400437 <strong>564</strong> SS/DF/DLX w Barrier (2014 or Later) <strong>564</strong> HO GS w Barrier (2014 or Later)Packing ListSizing<strong>Face</strong>plateUpper and Lower GrillsDoors (Left and Right)(6) #8 x 3/8” Sheet Metal Screws<strong>IronWorks</strong> <strong>Face</strong> – Non‐Barrier (old) <strong>95400432</strong> <strong>564</strong> SS/DF/DLX (no barrier) <strong>564</strong> HO GS (no barrier)<strong>Face</strong>plateWidth 36 1/8”Height 29 1/8”Depth on Hearth ½” ** This dimension is the minimum depth. The face may be positioned to accommodate different facing depths,making this dimension up to 1” larger.<strong>Installation</strong>Carefully remove the packaging and lock‐ties from the faceplate and doors.1. Remove the glass barrier screen (see owner's manual for details). Secure the arch cover to the barrierfollowing the directions below (arch cover is shipped with the fireplace). Replace the glass barrier.Lift the barrier up, pivot the top forward,and remove from the fireplace.Arch CoverBend the tabs over tosecure the arch cover tothe barrier.Page 1 of 4 17601658 — 4/13/15 © Travis Industries, Inc.
<strong>564</strong> <strong>IronWorks</strong> <strong>Face</strong><strong>Installation</strong> <strong>Instructions</strong>2. Attach the faceplate to the fireplace as shown below.Slide the face into place andsecure with the six includedscrews.NOTE: These slots are provided to allow theface to be installed off of the fireplace whenusing tile or other non-combustible facing.Careful front to back and side to sidealignment is required to ensure proper dooralignment.Page 2 of 4 17601658 — 4/13/15 © Travis Industries, Inc.
<strong>564</strong> <strong>IronWorks</strong> <strong>Face</strong><strong>Installation</strong> <strong>Instructions</strong>3. Hang the grills included with this face on the fireplace.Upper Grill <strong>Installation</strong>Hold the grill at a slight angle and insert it behindthe face and in front of the bushings on thefireplace.Line up the upper slots on the grill with the upperbushings on the fireplace. Push the grill in, then downuntil the grill locks into place.Lower Grill <strong>Installation</strong>Place the FPX label onto this platebefore shutting the grill.Hold the grill at an angle and insert the lowerslot over the bushing on the fireplace (bothsides). You may need press on the grill to getthe tab over the bushing (this prevents thegrill from accidentally falling off).Bend the tab outward onboth sides. This is theend-stop for the lower grill,it allows the grill to swingforward.Swing the grill upwards to engagethe upper slot. You will need to liftthe grill slightly to get it over thebushing. Once in place the grill isheld in place by gravity.Page 3 of 4 17601658 — 4/13/15 © Travis Industries, Inc.
<strong>564</strong> <strong>IronWorks</strong> <strong>Face</strong><strong>Installation</strong> <strong>Instructions</strong>4. Attach the glass frame to the fireplace.5. Install the doors as shown below. When closing the doors, make sure to bring them together at the same timeto ensure proper alignment.NOTE:NOTE:Magnets are shipped attached to the face. Take care with the magnets and keep them away fromchildren.If the magnets become dislodged from the position in the faceplate, carefully re‐install them.Page 4 of 4 17601658 — 4/13/15 © Travis Industries, Inc.
Change language