EMC Avamar 6.0 for Exchange Guide - EMC Community Network

More documents

Recommendations

Info

PREFACECaution safety admonitions indicate a hazardous situationwhich, if not avoided, could result in minor or moderateinjury.IMPORTANT: Important notices contain informationessential to software or hardware operation.NOTE: Notes contain information intended to clarify a topicor procedure. Notes never contain information that willcause a failure if ignored.TIP: Tips present optional information intended to improveyour productivity or otherwise enhance your experience withthe product. Tips never contain information that will cause afailure if ignored.EMC AVAMAR 6.0 FOR EXCHANGE GUIDE 8
INTRODUCTIONThe Avamar Exchange Client 6.0 provides a complete backup and recoverysolution for Microsoft Exchange Server 2007 and 2003 platforms. For backup andrecovery for Exchange 2000, use Avamar Exchange Client 4.1.Important terms and conceptsRecovery data stored in an Avamar system is inherently online all the time. Oncean Exchange server has been backed up to the Avamar system, the entireExchange server or one or more Exchange message folders can be quicklyrecovered without having to locate and mount tape media.For Exchange Server 2007 and 2003, the Avamar Exchange Client provides twoplug-ins to the Exchange server — the Windows Exchange Database plug-in forbacking up and restoring the Exchange database and a MAPI-based WindowsExchange Message plug-in for backing up and restoring the Exchange messagefolders within individual mailboxes.NOTE: Though either the legacy Exchange Client (with theWindows Exchange Database plug-in and Windows ExchangeMessage plug-in) or the Windows Exchange 2007-2010 VSSplug-in can be installed on Exchange Server 2007, installingand using both is not supported. Microsoft recommendsusing VSS-oriented backup, and if you need to back up aCCR passive node in Exchange Server 2007, you must usethe Windows Exchange 2007-2010 VSS plug-in and cannotuse the legacy Exchange Client.Exchange Server 2010. For Exchange Server 2010, you must use the WindowsExchange 2007-2010 VSS plug-in for backup and recovery. For more informationabout Exchange Server 2010 backup and recovery, refer to the EMC AvamarExchange VSS Client User Guide.EMC AVAMAR 6.0 FOR EXCHANGE GUIDE 8
Page 1 and 2: EMC ® AVAMAR ® 6.0FOR EXCHANGEGUI
Page 3 and 4: TABLE OF CONTENTSPreface . . . . .
Page 5 and 6: PREFACEScope and intended audienceS
Page 7: Safety admonitions and noticesPREFA
Page 11 and 12: Important terms and conceptsINTRODU
Page 13 and 14: System requirementsINTRODUCTIONSupp
Page 15 and 16: Capabilities and limitationsINTRODU
Page 18 and 19: Capabilities and limitationsINTRODU
Page 20 and 21: INSTALLATIONThis chapter describes
Page 22 and 23: Quick reference installation road m
Page 24 and 25: 10. Click Finish to complete the in
Page 26 and 27: Configuring Exchange Server 2007 fo
Page 38 and 39: Configuring the Avamar Cluster Clie
Page 40 and 41: Configuring the Avamar Cluster Clie
Page 42 and 43: Uninstalling and upgrading Avamar E
Page 44 and 45: Uninstalling an older version of Cl
Page 46 and 47: BACKUPThis chapter describes how to
Page 48 and 49: Seeding the Avamar server for first
Page 50 and 51: Backing up an entire Exchange Datab
Page 52 and 53: Backing up an entire Exchange Datab
Page 54 and 55: Backing up one or more message fold
Page 56 and 57: Backing up one or more message fold
Page 58 and 59:
Backing up one or more message fold
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Recovering an entire Exchange datab
Page 68 and 69:
Recovering an entire Exchange datab
Page 70 and 71:
Restoring to a RSG with the Windows
Page 72 and 73:
Restoring to a RSG with the Windows
Page 74 and 75:
Restoring to a RSG on an alternate
Page 76 and 77:
Restoring to a RSG on an alternate
Page 78 and 79:
Recovering to a Storage Group on a
Page 80 and 81:
APPENDIX A — PLUG-IN OPTIONSImpor
Page 82 and 83:
Windows Exchange database plug-in o
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
APPENDIX B — MANUALLY CREATING TH
Page 90 and 91:
Manually creating the AvamarBackupU
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
INDEXclustercreate AvamarBackupUser
Page 104:
INDEXWwarningnot provided for hidde
show all

EMC Avamar 6.0 for Exchange Guide - EMC Community Network

Create successful ePaper yourself

Delete template?

Save as template?