RBK 825 Recumbent Bike - Experience™ Series - Precor

14 Operating and Maintaining the P20 ConsoleOptional Use of the Power AdapterAn optional AC power adapter provides sustained power tothe equipment. This adapter allows you to change settingswithout having to pedal the equipment. To purchase thepower adapter, contact your dealer.If you purchase the optional power adapter, you must alsopurchase the internal cable kit. The kit supplies the cable,bracket, and fasteners that connect the power adapter to thelower electronics board.CAUTION: The internal cable kit must be installed by authorizedservice personnel. Do not attempt installation on your own as youcould void the Precor Limited Warranty. For more information,refer to Obtaining Service.Important: If this equipment includes a P80 console, the optionalpower adapter and the internal cable kit must still be installed toprovide continuous power to the base unit and support its internalbattery.Once the internal cable kit is installed, you can plug theoptional power adapter into the equipment. Plug the oppositeend into the appropriate power source for your equipment(120 V or 240 V). Review the safety instructions found at thebeginning of this manual before using the power adapter.CAUTION: When the optional power adapter is in use, make surethat the power supply cord does not create a safety hazard. Keepit out of the way of traffic and moving parts. If the power supplycord or power conversion module is damaged, it must be replaced.The control console functions differently when the poweradapter is connected. Because the power adapter provides aconstant source of power, a user can pause for brief periodswithout initiating shutdown procedures. When the pause timelimit expires and the user has not resumed exercising, theconsole returns to the Welcome screen. The default pausetime is 30 seconds for all fitness equipment. Refer to themanual for your control console for instructions on setting orchanging the pause time limit.