4 CHANNEL DVR

2.3.4.Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value.• SEQUENCE DWELL: Specify the auto sequence dwell time.• DE-INTERLACE MODE: Set to correct option of the screen trembling during playing in 4CIF size.• ALARM POP-UP MODE: Set to turn on or off the display of the alarm channel if an alarm occurs.• ALARM POP-UP DWELL: Set the duration of the alarm dwell time if an alarm occurs.• MOTION POP-UP MODE: Set to turn on or off the switching to the motion detecting channel’s fullscreen mode if a motion is detected.• MOTION POP-UP DWELL: Set the dwell time of the motion pop-up.This will display the motion popup for as much time as you specified and return to the split screen. If an alarm occurs or a motion is detected in more than one channel, the screen will switch to a split mode for thedisplay.When your settings are completed, press the button on the bottom.Your settings will be applied.Press the button to display the confirmation dialog and return to the previous menu.DVR SETUPSEQUENCEYou can select a split mode of the sequence and add or adjust the sequence dwell time.Using the mouse may help easy setup.ADDING SEQUENCE1.Use the direction buttons to move to the in the left corner of the DISPLAY setup screen and pressthe [ENTER] button.OSDDISPLAY2.Press the button on the bottom.MONITORACTIVATIONLISTDEFAULTCREATED BYadmin3.When the “ADD” window appears, select the TITLE inputbox.SEQUENCECANCELADD APPLY CLOSE4.Use the virtual keyboard to enter the name and press the button.M For using the virtual keyboard, refer to “Using the VirtualKeyboard”. (Page 27)DISPLAYOSDADDACTIVATIONMONITORSEQUENCE TITLEACTIVATION OFFSEQUENCESAVE CANCELCREATED BYadminCANCELADD APPLY CLOSEEnglish _31