4 CHANNEL DVR

DVR setupALARM OUTPUTYou can specify the alarming conditions and the operating time.Using the mouse may help easy setup.1. Use the direction buttons to move to in the left corner of the EVENT/SENSOR setupEVENT / SENSORscreen and press the [ENTER] button.HDD EVENT OPERATION ENABLE DURATION5 SECMODETRANSPARENT HDD EVENTOFFALARM2. Use direction buttons (▲▼◄►) to move to a desiredINPUTALARMVIDEO LOSSMOTIONCH 1ALARMCH 2item, and press the [ENTER] button to set the value.OUTPUTCH 3CH 4BUZZER OUT• OPERATION: Set the operation of the alarm output.E-MAILNOTIFICATION- If set to , the applicable menu is activatedwhere you can set other options.CANCEL APPLY CLOSE- If set to , other items will be disabled.• MODE: Set the output mode of the alarm.- If set to , the alarm will sound for as much time as defined in DURATION.- If set to , the DURATION item will be disabled.• DURATION : Set the duration of the alarm output.- If you select , the buzzer will be stopped when you press any button on the front panelor the remote control.• HDD EVENT: Set to use the alarm output if the HDD is full.• ALARM, VIDEO LOSS, MOTION: Set the alarm output for each channel if an event of alarm, video lossor motion detection occurs.3. When your settings are completed, press the button on the bottom.Your settings will be applied.4. Press the button to display the confirmation dialog and return to the previous menu.BUZZER OUTYou can specify the alarm input channel and the event conditions for the buzzer.Using the mouse may help easy setup.1. Use the direction buttons to move to inthe left corner of the EVENT/SENSOR setup screen andEVENT / SENSORpress the [ENTER] button.HDD EVENT OPERATION DISABLEHDD EVENTOFFMODETRANSPARENT DURATION5 SECALARM2. Use direction buttons (▲▼◄►) to move to a desiredINPUTALARMVIDEO LOSSMOTIONCH 1ALARMCH 2item, and press the [ENTER] button to set the value.OUTPUTCH 3CH 4BUZZER OUT• OPERATION: Set the operation of the buzzer output.E-MAILNOTIFICATION• HDD EVENT: Set the buzzer output if a HDD eventoccurs.CANCEL APPLY CLOSE• MODE: Set the output mode of the buzzer.- If set to , the buzzer will sound for asmuch time as defined in DURATION.- If set to , the DURATION item will be disabled.• DURATION : Set the duration of the buzzer output.- If you select , the buzzer will be stopped when you press any button on the front panelor the remote control.• ALARM, VIDEO LOSS, MOTION: Set the buzzer output for each channel if an event of alarm, video lossor motion detection occurs.42_ DVR setup