Download PDF - SMC Pneumatics (Ireland)

More documents

Recommendations

Info

Series ZSE80/ISE80DimensionsPanel mount (Bottom ported)407.55024.236±0.336 x n pcs. + 4 x (n pcs. – 1)36±0.33671.151.238.6Panel-cut dimensions4 x R3 or less 4 x R3 or less9
2-Color Display Digital Pressure SwitchFor General FluidsSeries ZSE80/ISE80Function DetailsA Auto-shift function (F4)When there are large fluctuations in the supply pressure, the switchmay fail to operate correctly. The auto-shift function compensatessuch supply pressure fluctuations. It measures the pressure at thetime of auto-shift signal input and uses it as the reference pressureto correct the set-value on the switch.Set-value correction by auto-shift function(Differential)PressureSwitchoutput1·(2)P-1(P-3)ONOFFH-1(H-2)Supply pressurenormalSupply pressuredropRectified value∗Supply pressureincreaseRectifiedvalue∗F in brackets stand for the function codes. Refer to the operatingmanual for how to operate and function codes in detail.B Auto-preset function (F8)Auto-preset function, when selected in the initial setting, calculatesand stores the set-value from the measured pressure.The optimum set-value is determined automatically by repeating vacuumand break with the target workpiece several times.Suction VerificationHighVacuumMax. AP-1n-1Min. BAtmosphereH-1SuctionWork 1 Work 2ReleasedWork 1 Work 2 Work nWork nAuto-shiftinputHiLoAB Switch output5 ms or more 10 ms or less response timewhen autoshiftis input.Formula for Obtaining the Set-ValueP_1 or P_2P_1 (P_2) = A – (A-B)/4n_1 (n_2) = B + (A-B)/4H_1 or H_2H_1 (H_2) = (A-B)/2∗ Rectified valueWhen the auto-shift is selected, “ooo” will be displayed for approximately1 second, and the pressure value at that point will be savedas a rectified value “C_5”. Based on the saved rectified values, theset-value Note) of “P_1”, “H_1”, “P_2”, and “H_2” will likewise be rectified.Note) When an output is reversed, “n_1”, “H_1”, “n_2”, “H_2” will berectified.Possible Set Range for Auto-Shift InputRegulating pressure rangeCompound pressure –110.0 to 110.0 kPaVacuum pressure 10.0 to –111.0 kPa–0.105 to 1.100 MPaPositive pressure–0.105 to 2.20 MPaPossible set range–220 to 220 kPa121.0 to –121.0 kPa–1.205 to 1.205 MPa–2.31 to 2.31 MPaAuto-shift zeroThe basic function of auto-shift zero is the same as the function forauto-shift. Also, it corrects values on the display, based on a pressurevalue of 0, when the auto-shift is selected.C Precision indicator setting function (F7)Fine adjustment of the indicated value can be made within the rangeof ±5% of the read value. The scattering of the indicated value canbe eliminated.Display pressure value±5% R.D.+0 Applied pressureDisplayed value at the time of shipmentAdjustable range of display calibration functionNote) When the precision indicator setting function is used, the set pressurevalue may change ±1 digit.D Peak and bottom display functionThis function constantly detects and updates the maximum (minimum)value and allows to hold the maximum (minimum) pressurevalue.When the buttons are simultaneously pressed for 1 second orlonger, while “holding”, the hold value will be reset.E Key lock functionThis function prevents incorrect operations such as accidentally changingthe set-value.F Zero-out functionThis function clears and resets the zero value on the display ofmeasured pressure.For the pressure switch with analog output, the analog output shiftsaccording to the indication. A displayed value can be adjusted within±10% F.S. of the pressure when ex-factory.10
Page 1 and 2: 2-Color DisplayDigital Pressure Swi
Page 3 and 4: 2-color display (LCD)Can select fro
Page 5 and 6: 2-Color Display Digital Pressure Sw
Page 11: 2-Color Display Digital Pressure Sw
Page 15 and 16: Series ZSE80/ISE80Made to OrderPlea
Page 17 and 18: Series ZSE80/ISE80Specific Product
Page 19: SMC'S GLOBAL MANUFACTURING, DISTRIB

Download PDF - SMC Pneumatics (Ireland)

Create successful ePaper yourself

Delete template?

Save as template?