Indoor Unit - Toshiba

4. Capacity calculation for each indoor unitCapacity for each indoor unitRequired standard capacity of indoor unit= Capacity after correction of outdoor unit ×Total value of standard indoor unit capacity5. Operating temperature rangeIn cooling timeIn heating time4520Outdoor air dry bulb temp. (˚C)4035302520151050–5ContinuouslyoperablerangeUsable range(in pull down)Outdoor air wet bulb temp. (˚C)151050–5–10–15Usable range(in warming-up)Continuouslyoperablerange–1010152025 2830–205 10 15 20 25 30Indoor air wet bulb temp. (˚C)Indoor air dry bulb temp. (˚C)* The unit can be operated even if outdoor temperature gets down to -20°C, however note that the warrantycovers only up to -15°C because operation beyond that temperature is out of specification.* When outdoor air temperature falls to under -15°C, it may cause shortening the product lifetime.* When outdoor temperature goes out of specified range “display and required operation will stop.or ” mark is indicated on the remote controller“ & ”: When heating operation“ ”: When cooling operation[Notice]• This indication is not failure.• When outdoor temperature goes back to specified range, “ or ” disappear and start normal operation.• Operation stops because concurrent operation can not be kept in the condition of out of specification forSuper HRM.(Outdoor temp.(DB) 21°C: Heating)* Do not use “Super HRM” for other than personal usage where the ambient temperature may go down below-5°C. (For example, OA equipment/Electric device/Food/Animals and plants/Art object)6. Rated conditionsCooling :Indoor air temperature 27°C DB/19.0°C WB, Outdoor air temperature 35°C DBHeating :Indoor air temperature 20°C DB, Outdoor air temperature 7°C DB/6°C WB19