Indoor Unit - Toshiba

Outdoor unitMMY-MAP0801FT8, MAP1001FT8, MAP1201FT84-15 × 20(Long hole)700anchor bolt pitch990750755anchor bolt pitch790(including steady leg)(NOTES)1. If there is an obstacle at the upper side of the outdoor unit,set the top end of the outdoor unit 2000mm apart from the obstacle.2. Limit the height of the obstacle surrounding the outdoor unit to800mm or less from the bottom end of the outdoor unit.3. Draw out the pipe procured locally to the front of the outdoor unithorizontally, and keep 500mm or more between the outdoor unitand traversing pipe if placing pipe transversely.Model nameMMY-MAP0801FT8MMY-MAP1001FT8Refrigerant pipeconnecting port(Suction gas side)MMY-MAP1201FT828.6A 1 Cutting position of L-shape pipe when pipeat gas side is connected(Recommended pipe connecting position)ØA22.222.21010 or more2-60 × 150 square hole(Hole for handling goods)610 10010080 63080700anchor bolt pitchRefrigerant pipeconnecting port(Discharge gas side)Refrigerant pipeconnecting port(Liquid side)Earth-attaching section of bottom plateFoundation755anchor bolt pitchFoundation500or more500or more10 or moreSpace required for service500or more(Note 3)(1000 or more)600 or more600or more500or moreFront sideFront sideFront side1750or moreFront side(For work and service)10 or more500or more(Note 3)(1000 or more)600 or more500or moreFront sideFront sideKnockout forcontrol piping (Ø27)115225231Knockout hole forpower piping (Ø48)8888 135154215Details of front pipe/cabling holesRefrigerant pipeconnecting port (Liquid side)Refrigerant pipeconnecting port(Discharge gas side)59 57144139Square hole81735258 130Refrigerant pipeconnecting port(Suction gas side)112Details of hole for piping at lower side (Plane view)800or less77