configuring ports - Lantech Communications Global Inc

TRAP RECEIVERSYou can also specify SNMP stations that are to receive traps from the switch.To configure a trap receiver, enter the ―snmp trap‖ commands shown below,and press .{For SNMPv1/v2c Trap setting}“set trap ”where ―version‖ indicates the SNMP client version (1, 2c, 3), ―community- string‖specifies access rights for a version 1/2c host, and ―host-address‖ is the IPaddress for the trap receiver. For a more detailed description of theseparameters and other SNMP commands. The following example creates a traphost for a version 1 SNMP client.>snmp trap version 1LGS-2816C-RPS(snmp)# set trap 1 2 192.168.1.10 162 publicLGS-2816C-RPS(snmp)#LGS-2816C-RPS(snmp)# show trapSNMPv3 Trap Host Configuration:No Ver. IP Port Community/Security Security Auth. Priv.Name Level Protocol Protocol-- ---- ------------ ---- ------------------ --------- -------- ---------1 v2c 192.168.1.10 162 public23456LGS-2816C-RPS(snmp)# del trap 1LGS-2816C-RPS(snmp)#.EXPORT OR IMPORTCONFIGURATIONSETTINGS.Configuration commands modify the working configuration, and areexported to a nonvolatile storage. To export the currentconfiguration settings to a backup server, enter the followingcommand, and press .―export ”where ―ip_address‖ is the ip address of the backup server, and―current| user” is the name under which the configuration settingsare exported.Managed Switch- LGS-2816C-PRSLogin: adminPassward:*****LGS-2816C-PRS# config-fileLGS-2816C-PRS(config-file)#LGS-2816C-PRS(config-file)# export ?Usage: export LGS-2816C-PRS(config-file)# export user 192.168.20.1