NVR user manual - Kamery IP

More documents

Recommendations

Info

6.4.2 RAID Management Tool*This function is not supported by the VS-101, VS-201, <strong>NVR</strong>-104.The RAID management tool allows you to carry out capacity expansion, RAIDmigration, or spare drive configuration with the original drive data reserved.• Expand capacityThis function enables capacity expansion of a RAID configuration by replacingthe member drives one by one. This option is supported by RAID 1, RAID 5, orRAID 6 configurations.• Add hard driveThis function enables adding new drive member to a RAID configuration. It issupported by RAID 5 configuration.• MigrateThis function enables a drive configuration to be migrated to a different RAIDconfiguration. You can use this feature to:- Migrate a single drive to RAID 1, 5, or 6- Migrate a RAID 1 configuration to RAID 5 or 6- Migrate a RAID 5 configuration to RAID 6128
• Configure spare driveThis function enables adding or removing a spare drive from a RAID 5configuration. The options available are:- Add a spare drive to a RAID 5 configuration- Remove a spare drive from a RAID 5 configurationFor detailed operation instructions, click “Comment” on the management interface.129
Page 1 and 2:
VioStor NVRNetwork Video RecorderUs
Page 3 and 4:
Important Notice• Reading instruc
Page 5 and 6:
Table of ContentsTABLE OF CONTENTS
Page 7 and 8:
6.5.1 Create user..................
Page 9 and 10:
Safety Warning1. This product can o
Page 11 and 12:
Chapter 1.Introduction1.1 OverviewQ
Page 13 and 14:
1.2.2 VS-8040/VS-8032/VS-80241. One
Page 15 and 16:
1.2.4 VS-5020/VS-50121. One touch a
Page 17 and 18:
1.2.6 VS-4016 Pro/VS-4012 Pro/VS-40
Page 19 and 20:
1.2.8 VS-2012 Pro/VS-2008 Pro1. One
Page 21 and 22:
1.2.10 VS-201P/V1. One touch auto v
Page 23 and 24:
1.2.12 VS-101P/V1. One touch auto v
Page 25 and 26:
Security Settings of the Web Browse
Page 27 and 28:
2.4 Check System StatusLED Display
Page 29 and 30:
Beep Alarm (beep alarm can be disab
Page 31 and 32:
3. Finder detects the VioStor serve
Page 33 and 34:
7. After the quick configuration, y
Page 35 and 36:
Chapter 3.Use VioStor by Local Disp
Page 37 and 38:
3.1 Quick ConfigurationIf the NVR h
Page 39 and 40:
4. Enter the date and time settings
Page 41 and 42:
To manually add an IP camera or edi
Page 43 and 44:
7. Verify the settings and click
Page 45 and 46:
IconDescriptionMonitor:Click this i
Page 47 and 48:
PTZ Control PanelThe term “PTZ”
Page 49 and 50:
Live View ScreenUpon successful con
Page 51 and 52:
Note:1. Enabling or disabling manua
Page 53 and 54:
Playback Settings:You can play, pau
Page 55 and 56:
2. Enter the user name and password
Page 57 and 58:
System configuration:Login the syst
Page 59 and 60:
c. PTZ: Pan/Tilt/Zoom camera contro
Page 61 and 62:
Camera StatusThe camera status is i
Page 63 and 64:
4.2.4 Multi-server MonitoringFollow
Page 65 and 66:
You can configure the following set
Page 67 and 68:
4. Click the number buttons to view
Page 69 and 70:
8. After configuring the auto cruis
Page 71 and 72:
5.1.1 Connect to Server for Playbac
Page 73 and 74:
3. Configure servers:a. Add: Add a
Page 75 and 76:
• Timeline searchi. Select the NV
Page 77 and 78: • Event entryi. Select the NVR se
Page 79 and 80: vi.Event search. This function is p
Page 81 and 82: 5.1.2 Play Video Files from Your Co
Page 83 and 84: Play the video of four IP camerasSe
Page 85 and 86: 2. On the playback window, click .8
Page 87 and 88: 6. Define the detection zone. Mouse
Page 89 and 90: 8. Click “Search” to start sear
Page 91 and 92: 5.1.5 Convert to AVI FileYou can sa
Page 93 and 94: 4. Enter the recording type.5. Spec
Page 95 and 96: 5.2 Digital WatermarkingVioStor NVR
Page 97 and 98: 6. Click to start playing and expor
Page 99 and 100: Clickto start checking the files. T
Page 101 and 102: 5.3.1 Windows Network Neighbourhood
Page 103 and 104: Chapter 6.System AdministrationTo l
Page 105 and 106: If the NVR is has not been configur
Page 107 and 108: Step 3. Enter the date, time, and t
Page 109 and 110: Step 6. Initialize the IP camera se
Page 111 and 112: 6.2 System SettingsYou can configur
Page 113 and 114: 6.2.3 View System SettingsYou can v
Page 115 and 116: If your NVR supports two LAN ports,
Page 117 and 118: • Load balancingLoad balancing en
Page 119 and 120: • Secondary DNS ServerEnter the I
Page 121 and 122: 6.3.3 File ServicesYou can enable t
Page 123 and 124: 6.3.5 Protocol ManagementTo assign
Page 125 and 126: 6.4 Device ConfigurationYou can con
Page 127: To create a RAID 5 disk volume, ami
Page 131 and 132: 6.4.4 UPSYou can connect a UPS (uni
Page 133 and 134: 3. userThe general users have only
Page 135 and 136: 6.5.2 Edit UserSelect a user on the
Page 137 and 138: 13. Change the cameraaccess control
Page 139 and 140: Note:1. All the settings will not t
Page 141 and 142: 6.6.2 Recording SettingsSelect a ca
Page 143 and 144: 6.6.3 Schedule SettingsYou can sele
Page 145 and 146: Note: All the settings will be effe
Page 147 and 148: • Events:The events supported by
Page 149 and 150: (2) Motion detectionThis option all
Page 151 and 152: (6) External event (user-defined ev
Page 153 and 154: • Actions:The NVR supports differ
Page 155 and 156: (1) RecordingSelect the channels (I
Page 157 and 158: (3) Alarm outputSelect to activate
Page 159 and 160: (5) SMSTo allow the system administ
Page 161 and 162: (7) User-defined ActionYou can ente
Page 163 and 164: • Pre-/Post-alarm Recordings• S
Page 165 and 166: 6.7.2 SMSC SettingsYou can configur
Page 167 and 168: 6.7.3 Restart/Shut DownFollow the s
Page 169 and 170: • Enable front video backup butto
Page 171 and 172: 6.7.5 System UpdateQNAP provides ne
Page 173 and 174: 6.7.6 Backup/Restore/Reset Settings
Page 175 and 176: 2. Enable remote replication (suppo
Page 177 and 178: 8. The NVR displays the latest 10 r
Page 179 and 180:
179
Page 181 and 182:
6.7.11 Advanced System SettingsYou
Page 183 and 184:
6.8.3 On-line Users ListThis page s
Page 185 and 186:
Chapter 7.System MaintenanceThis se
Page 187 and 188:
Chapter 8.LCD Panel* This section i
Page 189 and 190:
View the system information by the
Page 191 and 192:
4. SystemThis section shows the sys
Page 193 and 194:
Chapter 9.Troubleshooting1. The mon
Page 195 and 196:
8. The monitoring screen shows hori
Page 197 and 198:
Registration ProcedurePlease follow
Page 199 and 200:
4. Configure the mailing lists if n
Page 201 and 202:
Environment 2: VioStor and the IP c
Page 203 and 204:
Environment 3: VioStor and the IP c
Page 205 and 206:
Technical SupportQNAP provides dedi
Page 207 and 208:
Developers that use the GNU GPL pro
Page 209 and 210:
the work with that Major Component,
Page 211 and 212:
License and any conditions added un
Page 213 and 214:
If you convey an object code work u
Page 215 and 216:
licenses granted under the third pa
Page 217 and 218:
and under the terms of this License
Page 219:
COPYRIGHT HOLDERS AND/OR OTHER PART
show all

NVR user manual - Kamery IP

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?