NVR user manual - Kamery IP

Note: If you have updated the configurations of VioStor, the recording will bestopped temporarily and restart again shortly.4. I cannot login the administration page of VioStor.Please check if you have the administrator authority. Only administrators areallowed to login VioStor.5. The live video is not clear or smooth sometimes.A. The image quality may be restricted and interfered by the network traffic.B. When there are multiple accesses to the IP camera or VioStor, the imagequality will be reduced. It is recommended to allow only threesimultaneous connections to the monitoring page at maximum. Forhigher recording performance, do not open too many IE browsers to viewthe live video.C. The same IP camera may be shared by multiple VioStor servers forrecording at the same time.6. The alarm recording does not function.A. Please login the administration page of VioStor and go to “CameraSettings” > “Alarm Settings”. Make sure the alarm recording is enabledfor the IP camera.B. When using Panasonic BB-HCM311 cameras, the camera firmware mustbe upgraded to v1.3 for the alarm recording to work properly.C. If VioStor is installed behind a router while the IP camera is not, the alarmrecording will not work.D. When the alarm recording is enabled, make sure you have entered thenumber of days that the alarm recordings will be retained in “CameraSettings” > “Advanced Settings”. Otherwise, the recordings may beoverwritten.7. The estimated storage space for recording displayed on the“Recording Settings” page is different from the actual value.This estimated value is a reference value only. The actual disk space may varyaccording to the image contents, the network environment, and theperformance of the IP cameras.194