NVR user manual - Kamery IP

Note:1. All the settings will not take effect until you click “Apply”. When applying thechanges, the recording operation will stop for a while (maximum 1 minute) andthen restart.2. Click “Search” to search for the IP cameras on the local network. Select achannel for the IP camera and click “Add” to add the camera. By using thesearch function, the camera model and the IP address are filled inautomatically. Click “Close” to close the search results.Add generic IP camera support by the CGI commandThe NVR provides an interface for the users to enter the JPEG CGI command of theIP cameras in order to receive the video and audio streaming data from the IPcameras and monitor, record, and playback the video of the IP cameras on the NVR.Follow the steps below to configure your IP camera.1. Select the IP camera number.2. Select “Generic Model” for the camera brand.3. Select “Generic JPEG” for the camera model.4. Enter the cgi path of the IP camera in the “HTTP URL” field.5. Enter the camera name or the IP address of the camera.6. Enter the user name and the password of the IP camera.7. Select to enable the recording or not.8. Click “Apply” to save the settings.139