NVR user manual - Kamery IP

Camera StatusThe camera status is indicated by the icons shown below:Icon Camera StatusScheduled or continuous recording is in processThis IP camera supports audio functionThis IP camera supports PTZ functionManual recording is enabledThe recording triggered by advanced event management (“CameraSettings” > “Alarm Settings” > “Advanced Mode”) is in processThe alarm input 1 of the IP camera is triggeredThe alarm input 2 of the IP camera is triggeredThe alarm input 3 of the IP camera is triggeredMotion detection recording is in processDigital zoom is enabledConnection MessageWhen the NVR fails to display the video of an IP camera, a message will be shown inthe channel window to indicate the status.Message DescriptionConnecting If the IP camera is located on remote network or the Internet, itmay take some time to establish the connection to the camera.Disconnected The NVR cannot connect to the IP camera. Please check thenetwork connection of your computer and the availability of theIP camera. If the IP camera is installed on the Internet, makesure you have opened the port on your router or gateway inorder to access the IP camera. Please refer to Appendix B.No Permission You do not have the right to view the channel. Please login as auser with the access right or contact the system administrator.Server Error Please check the camera settings or update the firmware of theIP camera (if any). Contact the technical support if the errorpersists.50