NVR user manual - Kamery IP

2.4 Check System StatusLED Display & System Status OverviewLED Colour LED Status DescriptionFlashes greenand redalternatelyevery 0.5 sec1) The hard drive on the NVR is beingformatted2) The NVR is being initialised3) The system firmware is beingupdated4) RAID rebuilding is in process5) Online RAID Capacity Expansion isin process6) Online RAID Level Migration is inprocessSystemStatusRed/GreenRed1) The hard drive is invalid2) The disk volume has reached its fullcapacity3) The disk volume is going to be full4) The system fan is out of function*5) An error occurs when accessing(read/write) the disk data6) A bad sector is detected on thehard drive7) The NVR is in degraded read-onlymode (2 member drives fail in aRAID 5 or RAID 6 configuration, thedisk data can still be read)#8) (Hardware self-test error)Flashes redevery 0.5 secThe NVR is in degraded mode (onemember drive fails in RAID 1, RAID 5or RAID 6 configuration)*Flashes greenevery 0.5 sec1) The NVR is starting up2) The NVR is not configured3) The hard drive is not formattedGreenThe NVR is readyOffAll the hard drives on the NVR are instandby modeOrangeThe NVR is connected to the networkLANOrangeFlashesorangeThe NVR is being accessed from thenetwork27